hi all, about 2 start getting gear ready for a 3 inch body lift on my 2005 triton glx-r dual cab, besides top radiotor hose, fuel filler, radiator shroud, brake lines and gear sticks what other problems might i have. i done old mk patrol wagon myself so doing it myself isnt a problem.
later on down the track when snake racing release the 4 inch suspension lift ill be getting that 4 sure
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
body lift 2005 triton
Moderator: -Scott-
Hi mate,
I've not long fitted a 3" body lift to my UK L200 double cab. My list of mods was the same as yours but when I did it on mine, the fuel filler and top rad hose were fine. I did have to release the pressure on the front ABS sensor wires and I had to extend a flexi pipe the supplies air to the brake servo. The trick is to lift slowly and keep a good eye on things as you go.
Hope this helps.
Here is a pic after the lift with 35" Dyna Pro's fitted.
http://cid-8ebdc017b02ba651.skydrive.li ... MG2287.JPG
I've not long fitted a 3" body lift to my UK L200 double cab. My list of mods was the same as yours but when I did it on mine, the fuel filler and top rad hose were fine. I did have to release the pressure on the front ABS sensor wires and I had to extend a flexi pipe the supplies air to the brake servo. The trick is to lift slowly and keep a good eye on things as you go.
Hope this helps.
Here is a pic after the lift with 35" Dyna Pro's fitted.
http://cid-8ebdc017b02ba651.skydrive.li ... MG2287.JPG
They sell the twin headlights over here as a Mitsi genuine accessory, but they are stooooopidly expensive. Got mine off Ebay nice and cheap.
I personally wouldn't recommend that susp lift on Ebay, a couple of lads over here have tried them, throws the wheel camber way out, the wheels look like \ / , not sure how to overcome.
Give me a shout if you need some help with your lift.
I personally wouldn't recommend that susp lift on Ebay, a couple of lads over here have tried them, throws the wheel camber way out, the wheels look like \ / , not sure how to overcome.
Give me a shout if you need some help with your lift.
Have a look at these
http://www.e-styling.co.uk/scpro/estyli ... 401&page=1
Scroll down the page, you'll see em. They aren't the genuine Mitsi ones but Morette make good stuff and they are quite a bit cheaper. Might be worth asking if they send stuff international.
I have Old Man Emu rear springs, these give about 1.5" of lift and extended rear spring shackles that give another 1.5". Up front I have Ironman torsion bars that I have removed and moved around a couple of splines to give some extra lift. You tend to lose downward travel on the front wheels with the torsion bars cranked right up but it hasn't caused me any problems off road yet.
Hope this helps.
http://www.e-styling.co.uk/scpro/estyli ... 401&page=1
Scroll down the page, you'll see em. They aren't the genuine Mitsi ones but Morette make good stuff and they are quite a bit cheaper. Might be worth asking if they send stuff international.
I have Old Man Emu rear springs, these give about 1.5" of lift and extended rear spring shackles that give another 1.5". Up front I have Ironman torsion bars that I have removed and moved around a couple of splines to give some extra lift. You tend to lose downward travel on the front wheels with the torsion bars cranked right up but it hasn't caused me any problems off road yet.
Hope this helps.
Who is online
Users browsing this forum: No registered users and 7 guests