Are the 80 series front axle spring perches located directly over the centre of the axle or offset forward of the axle?
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 series spring perches
Moderators: toaddog, Elmo, DUDELUX
Thanks, how far forward would you say they are offset, it looks like the centre of the perch is aligned with the front of the axle housing?
I need to put them on my modified front end and the further forward they go the greater distance I can get between upper and lower perches by moving the upper purches forward and up on the chassis for maximum spring/shock height.
Don't want to go any more further forward than standard though, just looking for whatever gains I can sensibly get.
Cheers
I need to put them on my modified front end and the further forward they go the greater distance I can get between upper and lower perches by moving the upper purches forward and up on the chassis for maximum spring/shock height.
Don't want to go any more further forward than standard though, just looking for whatever gains I can sensibly get.
Cheers
Who is online
Users browsing this forum: No registered users and 11 guests