Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Doubleblack offroad flare photos
Doubleblack offroad flare photos
Bill (Patzuki on here) runs Doubleblack offroad, and offers a range of urethane flares. Bill and I been talking over the last few weeks and I agreed to take some photos of Bill's flares on my junk so there's some accurate info about what various flares cover.
Obviously, there's no vendor/yellow star system on Outers, and, I'm not affiliated with doubleblack offroad in any way. I'll be buying my flares the same as anyone else, I just did some work so everyone can see what covers what. Sorry if anyone thinks this is blatant marketing, that's not really my intention - it's not like TJ flares are hard to find, but at least there's a series of "like for like" photos for comparison.
The car is my 1.0 ute. It runs WT diffs.
The tyre/wheels details are as follows:
The GV rims are just that - GV rims, but they have been narrowed to 6.5" (this has had no effect on the overall width of the car on these wheels.) tyres are 9/34 16 swampers.
The Beadlocked rims are 2WD F100 rims flipped and offset. They are 5.5" rims before beadlocking, so they are effectively 6" rims now. They have about 2.25" of backspacing. Tyres are 9/34 16 swampers.
The alloy rims are 15X7. Not sure on offset but I'd reckon backspacing at about 3.5" (so 5P offset is likely) Tyres are AT 31 10.5's
The Q78's are on 15X7 rims, beadlocked for about 7.5" of overall rim width. Backspacing on these is about 3.5"
The calmini style flares are 5" in width.
The TJ flares are 7" in width.
Yes, my guards are a bit wonky. I tried to get them to fit as well as possible without too much work.
Here's the photos:
31 on alloy rim - side view
31 on alloy rim - front view. Tyre is *slightly* outside guard edge.
31 on alloy rim, rear view
34 on GV rim, side view
34 on GV rim front view. Tyre is fully covered.
34 on GV rim rear view
34 on beadlocked rim, side view
34 on Beadlocked rim, front view. Tyre is outside of guard edge.
34 on beadlocked rim, rear view
Q78, Calmini style flare, side view
Q78 Calmini style flare, front view. Tyre is well outside guard.
Q78 Calmini style flare, rear view.
Q78 TJ rear flare side view
Q78 TJ rear flare front view. Tyre is fully covered.
Q78 TJ rear flare rear view
Q78 TJ front flare side view
Q78 TJ front flare front view
Q78 TJ rear front 3/4 view
Q78 TJ front 3/4 view
Hope this provides some useful info.
to purchase these flares:
http://www.doubleblackoffroad.com/main.php
Steve.
Obviously, there's no vendor/yellow star system on Outers, and, I'm not affiliated with doubleblack offroad in any way. I'll be buying my flares the same as anyone else, I just did some work so everyone can see what covers what. Sorry if anyone thinks this is blatant marketing, that's not really my intention - it's not like TJ flares are hard to find, but at least there's a series of "like for like" photos for comparison.
The car is my 1.0 ute. It runs WT diffs.
The tyre/wheels details are as follows:
The GV rims are just that - GV rims, but they have been narrowed to 6.5" (this has had no effect on the overall width of the car on these wheels.) tyres are 9/34 16 swampers.
The Beadlocked rims are 2WD F100 rims flipped and offset. They are 5.5" rims before beadlocking, so they are effectively 6" rims now. They have about 2.25" of backspacing. Tyres are 9/34 16 swampers.
The alloy rims are 15X7. Not sure on offset but I'd reckon backspacing at about 3.5" (so 5P offset is likely) Tyres are AT 31 10.5's
The Q78's are on 15X7 rims, beadlocked for about 7.5" of overall rim width. Backspacing on these is about 3.5"
The calmini style flares are 5" in width.
The TJ flares are 7" in width.
Yes, my guards are a bit wonky. I tried to get them to fit as well as possible without too much work.
Here's the photos:
31 on alloy rim - side view
31 on alloy rim - front view. Tyre is *slightly* outside guard edge.
31 on alloy rim, rear view
34 on GV rim, side view
34 on GV rim front view. Tyre is fully covered.
34 on GV rim rear view
34 on beadlocked rim, side view
34 on Beadlocked rim, front view. Tyre is outside of guard edge.
34 on beadlocked rim, rear view
Q78, Calmini style flare, side view
Q78 Calmini style flare, front view. Tyre is well outside guard.
Q78 Calmini style flare, rear view.
Q78 TJ rear flare side view
Q78 TJ rear flare front view. Tyre is fully covered.
Q78 TJ rear flare rear view
Q78 TJ front flare side view
Q78 TJ front flare front view
Q78 TJ rear front 3/4 view
Q78 TJ front 3/4 view
Hope this provides some useful info.
to purchase these flares:
http://www.doubleblackoffroad.com/main.php
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
TJ fronts are terrible.
The TJ rears might be an option for people running 8" rims and 12.5's. At 7" wide (as the double black flares are) they're too wide for my front setup - 6" wide would be perfect. I'm not crazy about the look, but it looks kind of OK.
The calmini flares are my preferred style, but 5" of width isn't enough even for a 10.5, as the photos show.
It's a conundrum.
The TJ rears might be an option for people running 8" rims and 12.5's. At 7" wide (as the double black flares are) they're too wide for my front setup - 6" wide would be perfect. I'm not crazy about the look, but it looks kind of OK.
The calmini flares are my preferred style, but 5" of width isn't enough even for a 10.5, as the photos show.
It's a conundrum.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Sure will.mistaboz wrote:Steve, will these flares fully cover the guard with a virtual lift in the rear?
Cheers,
Paul
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Hey PJ,PJ.zook wrote:Is there a lip or anything on the flares that we can attatch some rubber to, so to get some extra width?
There is a lip on the flare so extensions are possible. I'll be attempting to do this with my own in the next week or so. Not sure how it's going to look (not too good i think) but need something to keep the tyres 'relatively' legal.
Cheers,
Anthony
Who is online
Users browsing this forum: No registered users and 62 guests