Gday,
Took the Paj to Diesel-Tec today to sort out the serious amount of diesel smoke it was producing. They put her on the dyno, gave me a call and apparently the Turbo is ruined along with some other things like a leak in the exhaust manifold, probably injectors and in need of a serious tune up. As im short on cash i said start by looking at the Turbo and manifold, as the rest are just things that will help, rather then major failure. He gave me another call, quoted $2600 for full rebuild, labor, new oil, gaskets etc. I am prepared to pay this, but anyone got any other suggestions? Ive been thinking of maybe selling, but in its current condition it wont fetch much and then i could buy into a lemon. Another option is buying a brand new turbo rather then a rebuild, or a buying a second hand turbo and putting that in. Anyone ever got a turbo rebuild before?
Thomas.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Turbo Rebuild
Moderator: -Scott-
Hi there,
I had a turbo rebuilt a couple of years ago, the main shaft had sheared in two on mine.
It cost me 350 GBP for a full re build. I looked around and found that a used turbo would have cost me two thirds of that and I wouldn't have known its history.
If you're planning on keeping the paj, I would go for a rebuild, unless you can find a good used turbo with a decent history.
Good luck.
I had a turbo rebuilt a couple of years ago, the main shaft had sheared in two on mine.
It cost me 350 GBP for a full re build. I looked around and found that a used turbo would have cost me two thirds of that and I wouldn't have known its history.
If you're planning on keeping the paj, I would go for a rebuild, unless you can find a good used turbo with a decent history.
Good luck.
Who is online
Users browsing this forum: No registered users and 24 guests