ok i topped up the cooling system on the Mav and tried to fit in 15litres of coolant but only could fit 9 or 10 at the most!
i read somewhere on the interweb (so yeh its gotta be true) that if the get the front end up on a climb that all the air should bleed to the radiator hence being able to put more coolant in!
now what im needing to know please, is there a sure way to bleed the air out?
i know there's a plug at the rear to flush out old coolant but im pretty sure filling it would not be the same!
maybe im being a bit paranoid but i don't want to crack another head and Ive read several times that this can be a cause of it!
cheers!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
TB 42 cooling system air bleed!
TB 42 cooling system air bleed!
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
I've found you can remove one of the hoses from the top of the thermostat housing and the water level will drop in the radiator allowing you to fill more in. Just keep filling till it flows out the hose you have removed and you should be right.
But as the other bloke says, you won't get 15 L in unless you have removed the drain plug in the back of the block.
But as the other bloke says, you won't get 15 L in unless you have removed the drain plug in the back of the block.
Who is online
Users browsing this forum: No registered users and 53 guests