General Tech Talk
Moderators: toaddog , TWISTY , V8Patrol , Moderators
Posts: 428 Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia
Post
by 2car Sun Oct 27, 2002 9:53 pm
Finally got of my arse and started the SOA. Haven't done much more than put all the bits in one place but it's a good start. Went out yesterday and got some steel for the new spring perches. Ahh crap, I forgot to get some for the trac bar mounts
That's my original front housing, and the rear housing that I got from BJ @ TTC. 60 series knuckles and disks for the front. 60 series hubs for the back with the Hilux disks that I have on the SU front at the moment. FJ 55 springs under the bench at the back. H55F 5 speed and splitcase to the left.
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.
Posts: 16934 Joined: Sun Oct 20, 2002 6:57 pm
Post
by RUFF Sun Oct 27, 2002 10:01 pm
So why not use a 60 series front housing while you are at it?
Posts: 428 Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia
Post
by 2car Sun Oct 27, 2002 11:11 pm
I am just using these axles to get me SOA ASAP. Then I can measure everything up and take my time getting the 60 series axles (I have a set) just right ie. rotated, trussed, stronger CVs blah blah blah. There's the U-bolt/diff thing too - no biggie, it will just take longer than the narrow housings.
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.
Posts: 16934 Joined: Sun Oct 20, 2002 6:57 pm
Post
by RUFF Sun Oct 27, 2002 11:30 pm
Ahhh thats right i forgot we brought down a HJ47 housing for ya not a HJ60 now i understand.
Posts: 4065 Joined: Thu Oct 24, 2002 8:31 am
Location: ACT
Post
by Wendle Mon Oct 28, 2002 7:15 am
Rockin....
I will come over to the northside and help you. I can drink beer and burn holes in housings.
Posts: 16934 Joined: Sun Oct 20, 2002 6:57 pm
Post
by RUFF Mon Oct 28, 2002 7:29 am
Wendle wrote: Rockin.... I can drink beer and bum holes in housings.
:shocked!:
Posts: 4065 Joined: Thu Oct 24, 2002 8:31 am
Location: ACT
Post
by Wendle Mon Oct 28, 2002 8:56 am
bahahahah
Posts: 15549 Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!
Post
by bj on roids Mon Oct 28, 2002 10:07 am
hehehehe GET IT AWWN!!
takes a day to get it done, then you got shaft, brake lines and chit
which adds time and $$$
hey carlton, go whoop his a$$ and get me that 5 speed and split case thats over there on the left
hands and mums dont count!!!
Posts: 2031 Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...
Post
by Damo Mon Oct 28, 2002 12:35 pm
A day? how come it takes so long? i heard you could just bolt it straight on
Posts: 15549 Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!
Post
by bj on roids Mon Oct 28, 2002 3:19 pm
its pretty much a bolt-on thing 8)
hands and mums dont count!!!
Posts: 428 Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia
Post
by 2car Tue Oct 29, 2002 11:35 am
bj on roids wrote:
Yah right! I work slowly. It will take me day to make the perches!
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.
Posts: 15549 Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!
Post
by bj on roids Tue Oct 29, 2002 1:06 pm
oh i can send some of mine with carlton and the steering arm 8)
hands and mums dont count!!!
Posts: 428 Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia
Post
by 2car Tue Oct 29, 2002 5:51 pm
Bootie Fab? Right on. How much?
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.
Posts: 15549 Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!
Post
by bj on roids Wed Oct 30, 2002 7:59 am
yeah!! bottie fab/bootie fab
we'll see, i had the perfect bit of c-channel for it!! but i bought 6 metres
hands and mums dont count!!!
Posts: 428 Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia
Post
by 2car Wed Oct 30, 2002 11:15 am
That's OK dude. I have some 6mm wall RHS. It's good to be able to say "I made my own".
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.
Posts: 15549 Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!
Post
by bj on roids Wed Oct 30, 2002 2:02 pm
righto......well......if i dig up some factory ones and you want them i will sned them with your steering arm
hands and mums dont count!!!
Posts: 2031 Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...
Post
by Damo Wed Oct 30, 2002 3:12 pm
Can you sned me some too BJ? you're t e h man
Catch you later, i gotta go work on my hyro
Posts: 15549 Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!
Post
by bj on roids Wed Oct 30, 2002 3:43 pm
HUH!! do you actually want perches i think mine are twice as wide as yours!!
hands and mums dont count!!!
Posts: 428 Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia
Post
by 2car Wed Oct 30, 2002 7:47 pm
Factory!!?? Mmmmm tasty. Where do you get factory perches - cut em off other axles? Bandsaw should be back in action tomorrow night - I'll post some pics - you be the judge!
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.
Posts: 15549 Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!
Post
by bj on roids Thu Oct 31, 2002 8:42 am
cut them off other axles??
hands and mums dont count!!!
Posts: 4065 Joined: Thu Oct 24, 2002 8:31 am
Location: ACT
Post
by Wendle Thu Oct 31, 2002 9:38 am
bahahah.. Arduous
Posts: 428 Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia
Post
by 2car Thu Oct 31, 2002 10:40 am
bj on roids wrote: arduous
An absolute gem!
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.
Posts: 2832 Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC
Post
by RoldIT Thu Oct 31, 2002 12:15 pm
BJ's been reading his "tha-sore-ass" again ... :wink:
KRiS
Posts: 15549 Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!
Post
by bj on roids Thu Oct 31, 2002 2:16 pm
ill bet you've been doing something with a DICK shunary to figure that out
hands and mums dont count!!!
Users browsing this forum: No registered users and 142 guests
