Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Turbo700 trans to Gen3 LS1?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 166
Joined: Thu Jan 15, 2009 8:18 pm
Location: Yeppoon CQ

Turbo700 trans to Gen3 LS1?

Post by swb_ute »

Does anyone know what flexplate and converter i need to be able to bolt a Turbo700 trans to a Gen3 5.7L LS1?

Cheers
Ben
www.teamecr.com.au
Posts: 166
Joined: Thu Jan 15, 2009 8:18 pm
Location: Yeppoon CQ

Post by swb_ute »

Ok for those who might need to know this info i have found out what i have to get.
First you need a TCI Flexplate part number 399753 you also need crank spacer GM Part number 12563532 and also extended bolts 12553332.

Cheers
Ben
www.teamecr.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests