Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

vibration

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 7
Joined: Sun May 11, 2008 9:43 am
Location: melb victoria

vibration

Post by bluerangie »

drivihg my 86 rangie classic on the hwy/fwy at around 75-80km i get a vibration on steering wheel any help running 16 x8 rims with simex extremes centerpede 32x10.5x16


steve
Top
Posts: 106
Joined: Wed Aug 18, 2004 3:05 pm
Location: S.E Suburbs, VIC.

Post by PSI250 »

if its not your wheels out of balance could be the panhard rod bushes, replace the bolt while your there, it gets fairly chewed out.
'86 Hiline, 3.9L, R380, Q78's, F&R Maxi's, Warn 8274
Top
Posts: 4
Joined: Tue Feb 03, 2009 6:46 pm
Location: brisbane

Post by MONGRELROVER »

simexs will always give you head shake
Top
Posts: 190
Joined: Wed May 21, 2008 3:55 pm
Location: Coffs Harbour, NSW

Post by PacMan »

Hi Mongrelrover,

i have 35" Simex Extremes Centerpede on a Range Rover and none shakes.

Balancing the tyres and checking all bushes and the drive shaft should fix the prob.


Greetings
Chris
Top
Posts: 57
Joined: Tue Apr 13, 2004 8:21 pm
Location: North Brissy

Post by subaman »

I had a bad head shake in my classic rangie. After replacing all bushes panard, radius arm still did not fix it. Ended up being swivel hub preload was not right. :x
gas grass or arse no one rides for free
Top
Posts: 57
Joined: Tue Apr 13, 2004 8:21 pm
Location: North Brissy

Post by subaman »

I had a bad head shake in my classic rangie. After replacing all bushes panard, radius arm still did not fix it. Ended up being swivel hub preload was not right. :x
gas grass or arse no one rides for free
Top
Posts: 36
Joined: Wed Sep 12, 2007 5:54 pm
Location: Selby

Post by mcdisco »

subaman wrote:I had a bad head shake in my classic rangie. After replacing all bushes panard, radius arm still did not fix it. Ended up being swivel hub preload was not right. :x
Yep, check your preload and also your steering dampener. Also, have a look at your wheel bearings...they might need tightening.

Angus
88' Rangie, 4.2L stroker, Motec, lockers, Jacmac axles, 35" Simex, body lift, 3" lift Koni's, b/bar, winch

D2, Tunit, 2" lift, 32" BFG MTs,bull bar, winch, diff & steering protector
Top
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Post by 6.5 rangie »

9 times out of 10 its the panhard bushes, they cost sweet f a so start there, if you get the super pro poly bush ones $28 a set, you don't need a press to install them, you can do it in a vice but you need a hand doing it.
Damien


--------------------------------------------------------
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest