Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rocklobster

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 295
Joined: Tue Dec 02, 2003 7:13 pm
Location: Perth W.A.

Rocklobster

Post by Wolverine »

G'day,

I was looking at an article about the rocklobster transfer case setup.
I was just curious why does it have to be an 84 transfer case that it is done too. What is so special or different about them.

Cheers
Posts: 266
Joined: Sun Jul 13, 2003 7:56 pm
Location: Gold Coast

Post by Bazooka »

The 1L transfer case has lower gearing.
By combining the gears from both transfer cases you can make the lower geared rocklobster case.
Posts: 295
Joined: Tue Dec 02, 2003 7:13 pm
Location: Perth W.A.

Post by Wolverine »

is that for any 1 lt case or does it have to be the 84 specifically
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Wolverine wrote:is that for any 1 lt case or does it have to be the 84 specifically


There are two types of 1L case - depending on the year of the car.

I think pre 1984 - they were different to what is commonly refered to as a 1L case (1984 to 1988ish).

Jtraf - perhaps you could shed some more light upon this? What was anf's wierd x-fer case?
DMA Founding Member #1 - Now Retired
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

has to be the t-case with the 4wd switch/light on it, which is on my 83 lwb 1.0L case. swb got the same case a bit later, 84 ish. the earlier cases are completely different, even mount up totally different. christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

christover1 wrote:has to be the t-case with the 4wd switch/light on it, which is on my 83 lwb 1.0L case. swb got the same case a bit later, 84 ish. the earlier cases are completely different, even mount up totally different. christover


If you have the right case I'd be talking to the Traf bros to do the same as the butter box.
yeshemesh
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

Is this the sort of thing you are looking at doing?

http://ironbark.bendigo.latrobe.edu.au/~jeff/xfer2.htm
Posts: 295
Joined: Tue Dec 02, 2003 7:13 pm
Location: Perth W.A.

Post by Wolverine »

yeah I was looking at doing something like that as I have a 1lt transfer case just lying around but I am not exactly sure what year it's from.

I also might be able to get an 83 1lt case aswell and if it's possible mix the gears with the 1.3 case.

But it all depends on wether it has to an 84 specific case.

Does that make sense.
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Wolverine wrote:yeah I was looking at doing something like that as I have a 1lt transfer case just lying around but I am not exactly sure what year it's from.

I also might be able to get an 83 1lt case aswell and if it's possible mix the gears with the 1.3 case.

But it all depends on wether it has to an 84 specific case.

Does that make sense.


I think the conclusion is that there are 4 different cases for sierras:

1. 1982 - 1983 - NT 1L Case (has no 4wd light and different chassis mounts)
2. 1944 - 1987 - NT 1L Case (has a 4wd light and mounts as per 1.3L case)
3. 1987 - 1996 - NT/WT 1.3L Case (has a 4wd light and taller gears)
4. 1997 - 1998 - Coiler 1.3L Case (chain driven and taller gears again).

Note: Years are only approximate - but this shows how you can identify the different cases.
DMA Founding Member #1 - Now Retired
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

bigsteve wrote:If you have the right case I'd be talking to the Traf bros to do the same as the butter box.


Ditto on this - Wolverine - try PM'ing jtraf - he and his brother had a set of gears made up to effectively make a rockhopper out of their x-fer case... could be worth investigating :)
DMA Founding Member #1 - Now Retired
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

greg wrote:I think the conclusion is that there are 4 different cases for sierras:

1. 1982 - 1983 - NT 1L Case (has no 4wd light and different chassis mounts)
2. 1944 - 1987 - NT 1L Case (has a 4wd light and mounts as per 1.3L case)
3. 1987 - 1996 - NT/WT 1.3L Case (has a 4wd light and taller gears)
4. 1997 - 1998 - Coiler 1.3L Case (chain driven and taller gears again).

Note: Years are only approximate - but this shows how you can identify the different cases.


I'll say I think you could be a bit closer in your estimate :finger:
Ransom note = demand + collage
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

grimbo wrote:
greg wrote:I think the conclusion is that there are 4 different cases for sierras:

1. 1982 - 1983 - NT 1L Case (has no 4wd light and different chassis mounts)
2. 1944 - 1987 - NT 1L Case (has a 4wd light and mounts as per 1.3L case)
3. 1987 - 1996 - NT/WT 1.3L Case (has a 4wd light and taller gears)
4. 1997 - 1998 - Coiler 1.3L Case (chain driven and taller gears again).

Note: Years are only approximate - but this shows how you can identify the different cases.


I'll say I think you could be a bit closer in your estimate :finger:


It's been the same x-fer case since WW2 :D

:oops:
DMA Founding Member #1 - Now Retired
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

More important is the tooth count on the gears , If you combine the the gears from the common one we get over here it will net you hardly ant increase in ratio ,.
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

This is how to identify a late 1ltr case.

If it has the Light switch but the lay shaft doesnt stick out of the case it is a 1.3 case. If it doesnt have the light switch at all its an early 1ltr case.

Making the rocklobster gears is not an easy task to get right. But i have seen lots done and if done right failure is very uncommon. I know for a fact a lot of guys that bought Series 1 rockhoppers a few years back actually have rocklobster gearsets made localy here in SE/QLD.
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 0 guests