Body Lift

Post by **callumm** » Mon Nov 30, 2009 9:30 pm

Hey all. Just wondering if anyone knows where on the northside of brisbane i can have bodyblocks fitted and engineered?? cheers

Post by **DUDELUX** » Tue Dec 01, 2009 12:02 am

install the body lift yourself, its a piss easy job to do, could do it by yourself in a day, even with fiddling around.
there was a thread on this not long ago, use the search function at the top of page.
or you could pay someone to do it for you.
as for engineers, pm bubs, he should know who can cert. your body lift

Post by **callumm** » Tue Dec 01, 2009 7:22 pm

Yeah mate i have no dramas fitting them, but the problem is i cant find anywhere that will engineer them if i fit them nor do i know of somewhere that will fit and engineer them both at the same time.

Post by **yamaha__308** » Tue Dec 01, 2009 8:37 pm

No need for engineering of a bodylift. Just an inspection at QT and few forms.

Search.

Post by **bj on roids** » Wed Dec 02, 2009 5:48 am

yamaha__308 wrote:No need for engineering of a bodylift. Just an inspection at QT and few forms.

Search.

yep

Post by **-Scott-** » Wed Dec 02, 2009 7:09 am

bj on roids wrote:
yamaha__308 wrote:No need for engineering of a bodylift. Just an inspection at QT and few forms.

Search.
yep

Not so much "no need" as can't "engineer" them - there is no "code" for an engineer to "sign off", there is no mod plate. Fill out the QT form, wait for it to come back, install the body lift, take it to QT Caboolture for an inspection (apparently they're nicer than the city mob... )

Note: when you go to QT for the inspection they put it over the pits. They WILL look at more than just the body lift - make sure the vehicle is roadworthy, because they'll pick it if it's not. Clean (inside and out) makes it look like you maintain your vehicle well, so they may not look as hard.

Post by **QLD4x4** » Wed Dec 02, 2009 9:55 am

No need for "Engineer Inspection", as you can legally have a 2" suspension lift + a 2" body lift in QLD. As far as I am aware the QT form is a self assessment form which you can just post in as their is no requirement for QT inspection....... Jeff

Post by **TWISTY** » Wed Dec 02, 2009 12:44 pm

QLD4x4 wrote:No need for "Engineer Inspection", as you can legally have a 2" suspension lift + a 2" body lift in QLD. As far as I am aware the QT form is a self assessment form which you can just post in as their is no requirement for QT inspection....... Jeff

QLD Dot do inspect the vehicle after the bodylift is installed.

1.You fill in the form
2. Wait for the approval letter to come in the mail.
3. Install the lift.
4. Book inspection with the Dot centre they nominate on the approval letter.
5. Go to inspection, whole vehicle is checked over (even if its only 3 months old like mine was). If they are happy with the install, and the roadworthy-ness of the rest of the vehicle, they will stamp the approval letter.

Did all this process a few months ago on my hilux.

Outer Limits 4x4 Board

Body Lift

Body Lift

Who is online