Hey Guys,
I've got a Boss air compressor. Its the grande I think. 3/4 HP jobbie, 100% duty cycle. I picked it up second hand, but it needs a few parts. Does anyone know who the manufacturer is? I haven't had any luck finding out as i wanted to contact them to try to source some parts for it.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Boss air compressor
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Boss air compressor
...I'm looking for a solution that involves flogging a dead horse...or cat...
a bit of googling found me this...
hard to find but i remembered looking for a mate last year..
here you go chief..
http://www.bossglobalinc.com/contact.html
hard to find but i remembered looking for a mate last year..
here you go chief..
http://www.bossglobalinc.com/contact.html
For all your HID and LED stuff
http://offroadindustries.com.au/
Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
http://offroadindustries.com.au/
Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
HI Mate, good luck with your fix.
When it is time to do your install remember how big the thing is.
I have one of these and was very disappointed at its performance after install. It turned out that the cable i ran was a little undersize. (I ran a big cable) too much voltage drop to the back of the car for the compressor to perform at its optimum.
I ended up having 3 goes at this after taking it back to complain about the advertising suggesting that it could pump lots fast etc.
Go to CIG or BOC and buy THE BIGGEST single core wire (twice the size of jumper leads) (12mm to 15mm of copper core) straight to the back just for this thing and it will pur along well. Any less and you might as well go buy 2 cheapys and run one on each side of the car. It will just run slow and piss you off and burn out the cable.
The new high output ARB will go bang for bang with one of these for speed.
Good luck
When it is time to do your install remember how big the thing is.
I have one of these and was very disappointed at its performance after install. It turned out that the cable i ran was a little undersize. (I ran a big cable) too much voltage drop to the back of the car for the compressor to perform at its optimum.
I ended up having 3 goes at this after taking it back to complain about the advertising suggesting that it could pump lots fast etc.
Go to CIG or BOC and buy THE BIGGEST single core wire (twice the size of jumper leads) (12mm to 15mm of copper core) straight to the back just for this thing and it will pur along well. Any less and you might as well go buy 2 cheapys and run one on each side of the car. It will just run slow and piss you off and burn out the cable.
The new high output ARB will go bang for bang with one of these for speed.
Good luck
GQ TD42, MTQ Turbo, Frozen Boost IC, Flexi 5", Drop boxes, Locked both ends, Superiors everything. Custom rear bar, sliders, Hi Mount, Plasma. TOY. GU IV TD42T Tourer stock with a list.
Thanks mate, appreciate the tip.
My second battery is located at the back of the 4wd, near where the compressor will be. Thanks to a mate of mine I have connected the two batteries with cable that is rated to about 1kv (1000v). Its like stupidly thick and massively over engineered. I have no voltage drop
Was planning on using some heavy duty wire to do the solinod and compressor. Thanks champ
My second battery is located at the back of the 4wd, near where the compressor will be. Thanks to a mate of mine I have connected the two batteries with cable that is rated to about 1kv (1000v). Its like stupidly thick and massively over engineered. I have no voltage drop
Was planning on using some heavy duty wire to do the solinod and compressor. Thanks champ
...I'm looking for a solution that involves flogging a dead horse...or cat...
Who is online
Users browsing this forum: No registered users and 0 guests