Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Replacement seat for LN106 single cab

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 139
Joined: Wed Jun 18, 2008 7:51 pm
Location: NSW

Replacement seat for LN106 single cab

Post by highwaychook »

Is there an easy replacement seat available for my LN106 single cab? There is not much room in the cab, however it must have been done over the years, whether it was a new or second hand seat.

Any info appreciated fellas
Posts: 156
Joined: Mon Nov 06, 2006 2:09 pm
Location: Southside, Brisbane

Post by Rilux »

Hi mate,

I put 4 Runner seats in my cab, to get rid of the bench. It fits perfectly on the passenger side, but on the drivers side only 3 bolts fit...you can make a bracket up for the fourth.
Some say he knows two facts about ducks...and they're both wrong.
Posts: 750
Joined: Mon Aug 25, 2008 12:06 am
Location: gold coast

Post by johnsy86 »

r32 skyline, 3 bolts line up sweet and good seat.
Lj80 tuff truck "mr Grumpy"
Posts: 55
Joined: Thu Sep 25, 2008 12:06 pm
Location: aus

Post by muzza85 »

stratos seats
Posts: 139
Joined: Wed Jun 18, 2008 7:51 pm
Location: NSW

Post by highwaychook »

Thanks fellas. I'm after something a little more comfy, so I'll take a squiz at what's been mentioned. ;)
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

I used nissan Tarrano ones. Nearly all bolts line up.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Posts: 139
Joined: Wed Jun 18, 2008 7:51 pm
Location: NSW

Post by highwaychook »

I assume I still need to use the original hilux seat runners etc??
Posts: 3224
Joined: Mon Jan 12, 2004 6:03 pm
Location: Moggill

Post by phippsy »

I used some out of a Honda something, had the exact same front bolt mounts and the inside rear had 1/2" block or so under it and a small redrill of the outer rear mount and was sweet.
Posts: 100
Joined: Tue Aug 18, 2009 7:02 pm
Location: south coast

Post by optima »

i've been told that my98 99 wrx seats bolt strait in you just have to bend one of the mounting tabs abit . not shaw but could be worth sussing out as they are pretty comfy seats
if its got t#ts or tyres your gunna have trouble with it
Posts: 32
Joined: Wed Aug 12, 2009 2:35 am
Location: sydney

Re: Replacement seat for LN106 single cab

Post by jnrlux »

highwaychook wrote:Is there an easy replacement seat available for my LN106 single cab? There is not much room in the cab, however it must have been done over the years, whether it was a new or second hand seat.

Any info appreciated fellas
surf seats stright in i have them in my s/cab ln106 best thing i ever done
Post Reply

Who is online

Users browsing this forum: No registered users and 20 guests