Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 series suspension

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 83
Joined: Mon Nov 23, 2009 8:39 pm
Location: sunny coast

60 series suspension

Post by luk3y »

ive got an 89 model 60 series. it has 3 inch ironman suspension (springs not shackles) which was on ther when i bought it and doesnt flex as well as i would like her to. my brothers stock suspension out travels mine by far.
just wondering what everyone reckons would be the best suspension option to go for should i take the whole lot out and start again if so what suspension option would be best and i live in QLD so cant go soa.
any pics would be good help to. cheers
Top
Posts: 404
Joined: Sun Jan 11, 2009 6:39 pm
Location: serpintine wa

Post by hillbilliywheelchair »

start with checking your shock lengths then start pulling leaves out one at a time
thanks jono
Skip 1995 tdi disco the new tourer
Tin Worn the scat crawler with charade (fwd) motor and auto patroll transfer and locked yota diffs all for under $1000
Top
Posts: 273
Joined: Sun Jun 08, 2008 4:12 pm
Location: mornington peninsula vic

Post by richardsc »

what hillbilly said,alot of off the shelf kits are pretty stiff,also u could have the heavy rated springs,for heavy loads,though not sure they have a heavy and normal load setup,also have u got swaybars,newer 60s usually have front and rear sway bars,if fitted that will prevent articulation
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 7 guests