Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Changing upper ball joints
Moderator: Moderators
Changing upper ball joints
Hi guys i've just noticed the top ball joint on my 98 rodeo are torn so i need to replace them the question i have is do you need to loosen off the torson bars ( they have been wound up ) before you undo the ball joint and remove them or can you just pull them straight out Cheers in advanced
I did a ball joint flip on my tf/89 rodeo. did not have to do such a thing.
just jack it right up, the top arm stops on the bump stop, so your right to drop the bottom arm down further letting you change your joint. pretty damn easy.
just jack it right up, the top arm stops on the bump stop, so your right to drop the bottom arm down further letting you change your joint. pretty damn easy.
1989 HOLDEN RODEO- 31-10.5-15 Buckshots, 2" lift, kenwood 6x9s in front doors, uniden 510xl 27meg, uniden uh015 uhf, heavy duty bullbar, heavy duty bash plate, tranfer case sheild, Air compressor.
Who is online
Users browsing this forum: No registered users and 6 guests