Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Part numbers

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 733
Joined: Tue Jul 15, 2003 7:25 pm
Location: VIC working on my junk

Part numbers

Post by 308LUX »

Need part numbers for full front end rebuild including wheel bearings knuckle / kingpin bearings and seals
"The object of war is not to die for you country, but to make the other bastard die for his." - General George Patton
Top
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Post by 80's_delirious »

checkout the link below

Punch in your model here
Top
Posts: 733
Joined: Tue Jul 15, 2003 7:25 pm
Location: VIC working on my junk

Post by 308LUX »

80's_delirious wrote:checkout the link below

Punch in your model here
Just had a look these numbers are different to the actual part numbers...

ex: center bearing number from repco cb09 ... on the website 37100 ???
"The object of war is not to die for you country, but to make the other bastard die for his." - General George Patton
Top
Posts: 276
Joined: Mon Nov 11, 2002 5:36 am
Location: Melbourne

Post by srowlandson »

What Model / Series / Year etc
'64 Land Rover SIIA Lwb Tray
Top
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Contact:
Contact joel HJ60

Post by joel HJ60 »

308LUX wrote:
80's_delirious wrote:checkout the link below

Punch in your model here
Just had a look these numbers are different to the actual part numbers...

ex: center bearing number from repco cb09 ... on the website 37100 ???
One being a Repco part#, one being a Toyota part number?
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Top
Posts: 733
Joined: Tue Jul 15, 2003 7:25 pm
Location: VIC working on my junk

Post by 308LUX »

Its for an 85 hilux solid axle ... needing bearing and seal numbers for the front and rear axle so i can order through work...

Just wanted to make sure if i ordered a 37100 bearing it would be the same as a cb09
"The object of war is not to die for you country, but to make the other bastard die for his." - General George Patton
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 56 guests