Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Big jimny's that you know of
Big jimny's that you know of
can you please just post a pic and some technical details of some big jimnys that you have come across
JIMNY EXTREME ON LUX DIFFS
http://www.outerlimits4x4.com/ftopic185229.php
It's a JIMNY thing! (We don't care if you can't understand)
http://www.outerlimits4x4.com/ftopic185229.php
It's a JIMNY thing! (We don't care if you can't understand)
http://www.coffsharbour4wd.com.au/worklog.html
Bulant - very nice Jimny build up that is getting around Coffs Harbour
Bulant - very nice Jimny build up that is getting around Coffs Harbour
better than a bought one.
Bulant is a nice truck, and the green exoed one that overkill build was awesome! chatted to the owner (dave i think) at one tufftruck, nice bloke
'91 Toyota Surf SSR Ltd. 2.4 TD Auto, Coil SAS, Duals, 4.88, Longs w/ front ARB, 35" MTRs
'97 Toyota Surf SSR-G Intercooled 3.0 TD Auto. 2" lift, Xrox bar, Waeco, Drawers, 32" BFGs
'97 Toyota Surf SSR-G Intercooled 3.0 TD Auto. 2" lift, Xrox bar, Waeco, Drawers, 32" BFGs
gday guys...
im currently running 5.5inch coils under my jimny
in the front i have rear rav 4 shocks in the front and 40series shocks in the rear all supplyed by dobbinson suspension rockhampton
i have had to make castor plates for front and rear to roll the diff bak to normal
im getting a cross memeber removed tuesday so the tail shaft wont hit when i roll the diff bak to normal to get zero castor.
i also extend the auto hub lines and wil have to cut the shock mounts and move them about 10mm inwards to fit castor plates on the rear...
i would add pic if i new how..
[/list][/code]
im currently running 5.5inch coils under my jimny
in the front i have rear rav 4 shocks in the front and 40series shocks in the rear all supplyed by dobbinson suspension rockhampton
i have had to make castor plates for front and rear to roll the diff bak to normal
im getting a cross memeber removed tuesday so the tail shaft wont hit when i roll the diff bak to normal to get zero castor.
i also extend the auto hub lines and wil have to cut the shock mounts and move them about 10mm inwards to fit castor plates on the rear...
i would add pic if i new how..
[/list][/code]
Twisted by Design
Lux diffs in a Jimny...ROK88 wrote:sounds pretty cool so all you need now is sierra transfer with reduction gears, 35's and lux diffs mine is almost finished but soughting out brakes is a nightmare.
What would you be doing with your old
Jimny diffs?
96 Coily, 100mm lift, Jimny Front Diff, 4.09 diff gears, Reduction gears, 30" Trepadors, 6 Point Rollcage, Custom Bash Plates, Open diffs to give the big guys a run for their money!!
well the diffs went to the tip as i had 6 rears but they were all brocken i still got front diff i think and housings oh and som yuri 4x4 hardened cv's that are unbreakable what do you need
JIMNY EXTREME ON LUX DIFFS
http://www.outerlimits4x4.com/ftopic185229.php
It's a JIMNY thing! (We don't care if you can't understand)
http://www.outerlimits4x4.com/ftopic185229.php
It's a JIMNY thing! (We don't care if you can't understand)
Oh okay.
Thanks mate but I may have to do some
more research before anything happens.
I recently bent my rear diff housing (coily)
and I cant find a housing anywhere, im tryna
come up with alternitives to the coily rear diff.
I know the Jimny rear diff centre bolts directly
into the coily rear but im not sure if the fronts
are interchangable.
What $$$ you be after if i do decide to go that way?
Thanks mate but I may have to do some
more research before anything happens.
I recently bent my rear diff housing (coily)
and I cant find a housing anywhere, im tryna
come up with alternitives to the coily rear diff.
I know the Jimny rear diff centre bolts directly
into the coily rear but im not sure if the fronts
are interchangable.
What $$$ you be after if i do decide to go that way?
96 Coily, 100mm lift, Jimny Front Diff, 4.09 diff gears, Reduction gears, 30" Trepadors, 6 Point Rollcage, Custom Bash Plates, Open diffs to give the big guys a run for their money!!
Who is online
Users browsing this forum: No registered users and 66 guests