i am adapting a gear driven case onto my r150 box for a v8 conversion
will the top shift levers etc in my chain driven case fit in my new gear driven one.
by this i mean the internal selectors rather than the actual shifter lever.
any help would be much appreciated as i dont want to pull it apart and find it wont fit
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hilux transfer case question
Moderators: toaddog, Elmo, DUDELUX
hilux transfer case question
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
that was the hope.
i am using the gear drive case so i can put low range gears in but the gear drive case is forward shift and it needs to be top shift to fit behind the r150 box.
i am happy enough to buy a kit to convert it if i have to but just thought i would use what i had if i could
i am using the gear drive case so i can put low range gears in but the gear drive case is forward shift and it needs to be top shift to fit behind the r150 box.
i am happy enough to buy a kit to convert it if i have to but just thought i would use what i had if i could
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
ok, so you got a forward shift gear case. Just asked cause Im all for learning got some duals in the shed, just haven't pulled em apart myself.
Boof or Bubs should know.
Boof or Bubs should know.
'91 Toyota Surf SSR Ltd. 2.4 TD Auto, Coil SAS, Duals, 4.88, Longs w/ front ARB, 35" MTRs
'97 Toyota Surf SSR-G Intercooled 3.0 TD Auto. 2" lift, Xrox bar, Waeco, Drawers, 32" BFGs
'97 Toyota Surf SSR-G Intercooled 3.0 TD Auto. 2" lift, Xrox bar, Waeco, Drawers, 32" BFGs
Just convert the forward shift to top shift. No need for a kit.
Here's a few handy links:
http://www.pirate4x4.com/forum/showthre ... conversion
http://pirate4x4.com/forum/showthread.p ... =top+shift
http://www.4x4wire.com/toyota/tech/topshifter/
Here's a few handy links:
http://www.pirate4x4.com/forum/showthre ... conversion
http://pirate4x4.com/forum/showthread.p ... =top+shift
http://www.4x4wire.com/toyota/tech/topshifter/
Who is online
Users browsing this forum: No registered users and 1 guest