i was thinking of putting a supercharger kit from capa on a 4.5 l 80 series ute for a winch challange truck instead of going the ls2 has anyone used on any info would be great
cheers
nathan
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
capa kit on a 4.5 80 series
Moderators: toaddog, Elmo, DUDELUX
Wont make good low down torque without using aftermarket computer, and will need a good intercooler, and will need slight decompress/radius all exposed edges etc, to help with detonation if running more than 6 psi.
I have a CAPA unit on my 4.5 80. [Jan 4x4 action I believe]
I have modded my auto and torque convertor so a slightly higher stall to get on boost quicker, but more efficient design so it drives like it doesnt have a higher stall once moving.
I also run lower low range gears, and 4.56 Nitro gears in the diffs on 37's.
I have a CAPA unit on my 4.5 80. [Jan 4x4 action I believe]
I have modded my auto and torque convertor so a slightly higher stall to get on boost quicker, but more efficient design so it drives like it doesnt have a higher stall once moving.
I also run lower low range gears, and 4.56 Nitro gears in the diffs on 37's.
Supercharged 80 SOLD - "OPERATION SANDY" now in effect.
Who is online
Users browsing this forum: No registered users and 81 guests