I'm about to put 40's under a 75 series with full hydro. Has anyone put 40's under before? If you have can you give me a hint on what has to go other than the guards. 75mm spacers are going on. Coil over conversion completed
All opinions will be appreciated.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
40's under a 75 series
Moderators: toaddog, Elmo, DUDELUX
40's under a 75 series
NOTHING LIKE A HARD DAY AT THE OFFICE AS THE HAND BREAK SAYS
Banned
Some pic's would help i put 39.5 iroks under my FJ73 and had to move the body mount at the back of the front guard my diff is 120 mm forward too...! Good luck mate it takes a lot of chopping at least 100mm cut out of the bottom of the front guards mines on leafs still SOA.
TEAM TONKA
SPONSORED BY
HANCOCK SHEETMETAL
Locktup4x4.com.au
FOR ALL HARDCORE OFFROAD GEAR
SPONSORED BY
HANCOCK SHEETMETAL
Locktup4x4.com.au
FOR ALL HARDCORE OFFROAD GEAR
Who is online
Users browsing this forum: No registered users and 5 guests