Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Deep inside the skunkworks....

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
User avatar
AJ
Posts: 725
Joined: Thu Jan 23, 2003 10:44 pm
Location: Whyalla SouthOz

Contact:
Contact AJ

Deep inside the skunkworks....

Post by AJ »

its booty fab time :cool: :armsup:

The skunkworks workshop
Image

Image

The victim and the plan
Image

Time to get the 35 off the back door and get rid of those stupid lights in the plastic bumper
Image

Image

First scribbles
Image

Image

to be continued......
Andrew - 1999 GU ST 4.2Turbodiesel Wagon
Whyalla SouthOz

My website: http://www.touring4x4.com/
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Deep inside the skunkworks....

Post by bogged »

AJ wrote:and get rid of those stupid lights in the plastic bumper
to be continued......
Kewl.. I need the left bar light :)
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

what thickness is the C channel, it looks thin?
Top
Posts: 613
Joined: Sun Jun 28, 2009 1:44 pm
Location: qld

Post by ledgend80 »

the c channel looks like a bit of leftover from his shed. i think he is just using for an idea. well i hope he is.
Top
Posts: 91
Joined: Sun Jun 29, 2008 8:12 pm
Location: sydney

your plans

Post by zoook »

dont worry about the c channel...im drooling at his shed ...hes got all the bits for building big boys toys.... :armsup:
Top
User avatar
AJ
Posts: 725
Joined: Thu Jan 23, 2003 10:44 pm
Location: Whyalla SouthOz

Contact:
Contact AJ

Post by AJ »

ozy1 wrote:what thickness is the C channel, it looks thin?
The C is 1.5mm which will be plenty for the bumpers. Its ideal because its lightweight and has nice preformed radiussed corners.
There will be a 100x100x10 angle running full width to support the bumper and to mount the wheel carrier. The aluminium rear step will slip over the angle for a factory like look.

Thats the plan at this stage anyway :lol:
Andrew - 1999 GU ST 4.2Turbodiesel Wagon
Whyalla SouthOz

My website: http://www.touring4x4.com/
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

I want a bigger shed :x
Top
User avatar
AJ
Posts: 725
Joined: Thu Jan 23, 2003 10:44 pm
Location: Whyalla SouthOz

Contact:
Contact AJ

Post by AJ »

Todays progress, limited by multiple visitors. Damn christmas season. :D Bah humbug. They werent even the useful type that could swing an angle grinder. :roll:

The view behind the bumper section. Far more substantial than the crap plastic bumper itself
Image

Image

Image

The bar section on the bench
Image

Image

Checking, checking
Image
Andrew - 1999 GU ST 4.2Turbodiesel Wagon
Whyalla SouthOz

My website: http://www.touring4x4.com/
Top
User avatar
AJ
Posts: 725
Joined: Thu Jan 23, 2003 10:44 pm
Location: Whyalla SouthOz

Contact:
Contact AJ

Post by AJ »

continuing....

Rear angle view
Image

Wing added
Image

Image

Upper side wing
Image

Image

Image

Image
Andrew - 1999 GU ST 4.2Turbodiesel Wagon
Whyalla SouthOz

My website: http://www.touring4x4.com/
Top
User avatar
AJ
Posts: 725
Joined: Thu Jan 23, 2003 10:44 pm
Location: Whyalla SouthOz

Contact:
Contact AJ

Post by AJ »

One more from tonight
Image
Andrew - 1999 GU ST 4.2Turbodiesel Wagon
Whyalla SouthOz

My website: http://www.touring4x4.com/
Top
Posts: 87
Joined: Thu Jan 01, 2009 4:51 pm
Location: brisbane

stuff

Post by fumduk3 »

1.5/1.6 is pretty thin. You can dent it with a little hammer tap............with a little hammer. Design is looking good though :)
Top
Posts: 284
Joined: Mon Apr 14, 2003 5:08 pm
Location: Up to my nuts in it!

Post by Dirty »

Looking good.

2-4mm would be better material choices because the 1.5mm will fod lit a tin can if it hits anything.

Love the welding table, and cannot believe how clean the shed is.

- David.
Need a bigger shed...
Top
Posts: 30
Joined: Fri Jul 06, 2007 4:19 pm
Location: Melbourne

Post by PatrolDocta »

Dirty wrote:Looking good.

2-4mm would be better material choices because the 1.5mm will fod lit a tin can if it hits anything.

Love the welding table, and cannot believe how clean the shed is.

- David.

No shit thats what i was thinking wish i could keep my shed that clean

steve
Top
User avatar
AJ
Posts: 725
Joined: Thu Jan 23, 2003 10:44 pm
Location: Whyalla SouthOz

Contact:
Contact AJ

Post by AJ »

Dirty wrote:Looking good.

2-4mm would be better material choices because the 1.5mm will fod lit a tin can if it hits anything.

Love the welding table, and cannot believe how clean the shed is.

- David.
Double checked it teh other night and its actually 1.9mm base metal thickness.

Easier to keep the workshop clean and free of crap when you have 2 sheds. :)
Other shed has cars, trailers, kids crap, camping gear, etc.
Patrol would normally be in the other shed but it was handy to have it next to the job. :cool:
Andrew - 1999 GU ST 4.2Turbodiesel Wagon
Whyalla SouthOz

My website: http://www.touring4x4.com/
Top
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

That's gotta be a brand new shed. No workshop outside F1 can stay that clean.
Top
User avatar
AJ
Posts: 725
Joined: Thu Jan 23, 2003 10:44 pm
Location: Whyalla SouthOz

Contact:
Contact AJ

Post by AJ »

KiwiBacon wrote:That's gotta be a brand new shed. No workshop outside F1 can stay that clean.
Sheds are about a year old now http://www.outerlimits4x4.com/ftopic114974
Andrew - 1999 GU ST 4.2Turbodiesel Wagon
Whyalla SouthOz

My website: http://www.touring4x4.com/
Top
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

AJ wrote:
KiwiBacon wrote:That's gotta be a brand new shed. No workshop outside F1 can stay that clean.
Sheds are about a year old now http://www.outerlimits4x4.com/ftopic114974
Very nice, I'm as jealous as everyone else.
Apart from the living in a flat place. ;)
Top
User avatar
AJ
Posts: 725
Joined: Thu Jan 23, 2003 10:44 pm
Location: Whyalla SouthOz

Contact:
Contact AJ

Post by AJ »

Cut up the 100x100x10 equal angle tonight.
Prepped it, put it together, tacked it then welded the inside with a couple of passes.
Will flip it over tomorrow and back grind and fully weld it from the outside.

Once its been all fitted up and trialled I'll be drilling a heap of 35mm along the neutral axii to get some of the weight out of it.

Piccies:

Placed in position on the previously used layout
Image

Image

Image

Tack welded to the bench and tack welded together to help prevent movement/distortion/twisiting
Image

Image

Just enough penetration but OK as I'll be backgrinding it. A bit more root gap would have helped.
Image

Image

Image

A reminder of the bumper.
Image

Image
Andrew - 1999 GU ST 4.2Turbodiesel Wagon
Whyalla SouthOz

My website: http://www.touring4x4.com/
Top
User avatar
AJ
Posts: 725
Joined: Thu Jan 23, 2003 10:44 pm
Location: Whyalla SouthOz

Contact:
Contact AJ

Post by AJ »

This afternoons efforts:

Prep'd for welding
Image

Welded - 3 passes
Image

Cleaned up
Image

Image

Making a big hole with a small drill (if you call 10mm small)
Image

Image

Mr.Bosch got rid of that "chewed by a rat" look. Now it just looks like a bad circle. LOL
Image

The reason for the big hole.
Image

Image

The donor for the hub. Got two of these for $24 each at a Supercheap sale.
Image
Andrew - 1999 GU ST 4.2Turbodiesel Wagon
Whyalla SouthOz

My website: http://www.touring4x4.com/
Top
Posts: 303
Joined: Wed Nov 24, 2004 8:25 pm
Location: gold coast

Post by mavzilla »

was he buiding something ,i was still lookin at the shed. great thread and build looks great as well , keep em cumin
wish list (lockers,lift,endless air,winch,bar,spotties,35s,paint job,turbo,18yrs old hottie
Top
Posts: 805
Joined: Thu Sep 18, 2003 6:07 pm
Location: lost

Post by fatassgq »

any more progress on this bar???
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 5 guests