Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
stock link lengths?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
stock link lengths?
i am looking into doing a 4 link rear in my sierra ute with bundy diffs. i know that there are aftermarket arms available, some that are adjustable by 100-150mm for patrols and some toyotas. i am trying to find the longest stock arms available.
i know that gq patrol
upper arms = 40cm
lower arms = 67cm
does anyone else know what arms from a 80 series, surf or anything else measure too?
cheers
i know that gq patrol
upper arms = 40cm
lower arms = 67cm
does anyone else know what arms from a 80 series, surf or anything else measure too?
cheers
4age zook ute in lots of bits
Front 80 series lowers are 930mm (front eye to back eye) and 750mm (middle eye to back eye).
Last edited by Spimon_NH on Mon Dec 07, 2009 10:14 pm, edited 1 time in total.
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
I can measure some stock 80's later on. If you have no luck by this afternoon shoot me a Pm and i will get some measurements for you.
From memory the lowers are 700mm, uppers i cant remember.
Layto....
From memory the lowers are 700mm, uppers i cant remember.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Ill throw a tape on them for youlay80n wrote:I can measure some stock 80's later on. If you have no luck by this afternoon shoot me a Pm and i will get some measurements for you.
From memory the lowers are 700mm, uppers i cant remember.
Layto....
lowers are 700 and uppers are 400
thats measured from the center of the bolt hole to the center of the bolt hole on the other end with the bushes installed
xxxx wrote:
Who is online
Users browsing this forum: No registered users and 19 guests