Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Premier winch - price? and current draw vs tigerz?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
CT
Posts: 54
Joined: Thu Jul 15, 2004 6:54 pm
Location: Central Queensland

Premier winch - price? and current draw vs tigerz?

Post by CT »

Anyone done any better than about $1500 for a premier winch lately?

The big selling point for me is the minimal current draw (using the 4wd monthly test). Anyone got any sums comparing the current draw to that of any of the tigerz11 range?

Cheers
Craig
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

This is another option to the premier and it will not destroy your rope if you ever get some to replace the steel cable like other winches.

Mako TDS Series Low Mount Winch

Features:
1. External Brake
All of our Mako TDS Series winches run an external automatic cone brake drum. This feature is seen in more expensive winches as it is perfectly designed for synthetic rope use. Running a synthetic rope on a winch that features an ‘in the drum’ brake operation can often lead the integrity of the rope being compromised as the massive amounts of heat that is generated by the winch brake dissipates through the exterior of the drum and directly into the rope. Having a positive cam lock external brake means that there is no heat generated on the drum thus keeping rope strength qualities intact and holding the required load as more pressure that is applied, the tighter the brake becomes.
2. Rotating Ring Gear
When a winch is needed, the user is generally not focused on taking their time and being gentle with the winch itself. With the rotating ring gear featured on the Mako TDS Series winches, this isn’t a problem. Boasting a huge 18mm drop pin that engages the rotating ring gear in one of the eight provisions provided.
Whilst 18mm doesn’t sound huge, when compared to the 2-3mm sliding ring gear pin found in almost every other winch on the market (which, under strain has a tendency of simply ‘snapping off’) this clutch operation design can withstand any amount of abuse.
3. Line Pull Speed
With an unloaded line pull speed of nearly 18meters per minute the Mako TDS 9,500lb winch is almost as fast as the famous Warn 8274. In fact, if the Mako 9.5 had a larger diameter drum (i.e. the same as the 8274) it would actually be faster! This is a great draw card with both 4x4 winch competition participants and the general public alike.
4. Higher Tie Bars
In a perfect world, every situation that required the use of a winch would feature a winch point directly in line with the vehicle. Unfortunately this is not the case and more often than not, a lateral winch-in is required. Doing this creates a build up of rope/cable on either end of the drum and quickly this build up jams the rope/cable against the winch tie bars. Featuring slightly higher tie bars on our range of Mako winches obviously does not eliminate this problem, however, it does delay this down fall and allows the user to winch for longer.
Additional Features:
· Heavy duty sealed solenoids
· Low amp draw
· 5m Control lead with power and operation indicators
· V-Ring seals inside both drum flanges
· 3 stage planetary gear box
· Roller fairlead
· 12 month warranty

We are selling these if you are interested. I can also email all the info you need.

TDS Mako 9,500lb RRP: $895.00inc gst
TDS Mako 12,000lb RRP: $1045.00inc gst
TDS Mako 16,500lb RRP: $1495.00inc gst

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Posts: 3
Joined: Tue Nov 10, 2009 7:44 am
Location: Sydney

Post by razoraxe »

can you link some pics please
sounds very similar to the Premier winch
which is also the only winch in the country to have a lift rating
it also has rated cable
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

razoraxe wrote:can you link some pics please
tried google?
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

razoraxe wrote:can you link some pics please
sounds very similar to the Premier winch
which is also the only winch in the country to have a lift rating
it also has rated cable
i believe the tigerz11 has a lift rating now also...
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

[img][img]http://i52.photobucket.com/albums/g36/k ... 500lbs.jpg[/img][/img]

Have lots more if interested.

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
CT
Posts: 54
Joined: Thu Jul 15, 2004 6:54 pm
Location: Central Queensland

Post by CT »

Will the 12K winch fit in a nissan standard winch bar or only the 9.5K?
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

Both 9500lb and 12000lb winches will fit into the factory winch bar. They are both the same dimensions.

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Posts: 35
Joined: Mon Oct 02, 2006 3:52 pm
Location: Sydney

Post by philthylux »

My premier (and its on a IFS Hilux) pulled a mate's patrol out when his own warn 12 000 wouldn't.
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

Post by dank »

I rate the Mako's. I've had a good look at the internals and they are a solidly built and well finished off winch. I would be cautious in saying that build quality is up there with Warn as they are relatively unproven here in AUS but they are better built than some other popular chinese winches.

Only downside is the external cone brake makes them a bit long. At 612mm they don't fit a 75 series between the chassis rails, on top is fine though. Not sure on the later model 79 or 76 but the earlier ones had a narrow chassis.

If someone can prove this different that would be great, this is info I got off a potential buyer of a mako with a 75.
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Posts: 555
Joined: Fri Aug 03, 2007 11:10 pm
Location: port melbourne,vic

Post by flexytj »

man chinese crap is getting dear ,
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

flexytj wrote:man chinese crap is getting dear ,
If customs didn't slog us so much they would be cheaper. :bad-words: :bad-words: :bad-words:
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

Suspension Stuff wrote:
flexytj wrote:man chinese crap is getting dear ,
If customs didn't slog us so much they would be cheaper. :bad-words: :bad-words: :bad-words:
China is making a lot of good stuff and has been for a long time now. It comes down to quility control and they have certainly been forced to step up.

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Posts: 1245
Joined: Fri May 02, 2003 4:28 pm
Location: Kyrgyzstan

Post by me3@neuralfibre.com »

Suspension Stuff wrote:
flexytj wrote:man chinese crap is getting dear ,
If customs didn't slog us so much they would be cheaper. :bad-words: :bad-words: :bad-words:
What sort of hit do you get and why is it a dutiable good?

Paul
Lexus LX470 - hrrm Winter Tyres
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Posts: 123
Joined: Thu Apr 03, 2008 11:23 am
Location: mooroolbark Victoria

Winch duty

Post by tigerz11 »

me3@neuralfibre.com wrote:
Suspension Stuff wrote:
flexytj wrote:man chinese crap is getting dear ,
If customs didn't slog us so much they would be cheaper. :bad-words: :bad-words: :bad-words:
What sort of hit do you get and why is it a dutiable good?

Paul
Our Shipping agent (numbskulls) we have been charged 5% duty on winches for the last 6 years only late this year they realised 12v winches with condiitions are duty free,,
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

So nice xmas bonus getting all your wrongfull duties repaid, hey Paul?
[quote="bazooked"]can i use a mate to position while i screw? :twisted:[/quote]
Posts: 123
Joined: Thu Apr 03, 2008 11:23 am
Location: mooroolbark Victoria

Post by tigerz11 »

BowTieGQ wrote:So nice xmas bonus getting all your wrongfull duties repaid, hey Paul?
Yeah ,,when i see it ill believe it im sure there will be some excuse not to hand it over

paul
Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Post Reply

Who is online

Users browsing this forum: No registered users and 150 guests