Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

nissan patrol rims fitting 4runner

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 17
Joined: Wed Jun 18, 2008 9:53 pm
Location: SHELLHARBOUR NSW

nissan patrol rims fitting 4runner

Post by smuggler »

will nissan patrol rims fit on a 4runner??? or Is the stud pattern same???
Top
Posts: 83
Joined: Mon Nov 23, 2009 8:39 pm
Location: sunny coast

Post by luk3y »

yeah they fit them. with a bigger offset usaully.
Gu Ute with stuff
Top
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Post by Mr DJ »

Yes, same stud pattern and Patrol rims (zero offset) will give you a slightly wider stance and IFS 4Runner rims are -8mm offset I believe.

Only issue is the centre rim hole is bigger on the patrol rims (111mm) which means that the rim is located entirely on the studs. OK for road rims but not the best for offroad punishment.
IMO 40, 60 or 70 series Cruiser (up to 92) or solid axle hilux rims are a better choice for offroad use as the centre hole size is the same (100mm).

My 2c worth.
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Top
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Post by vk7ybi »

All of my cruiser rims are stud centric rather than hub centric, the hub and bore of the rim make no contact, all of the load is beared but he studs.. I have some MQ rims that wont clear the calipers on my 40.. Other than offset there is no reason to not run them.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 5 guests