Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MINI ME monster truck

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

Mad looks like a Hummer
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

Needs a UHF too...

x bogedisacrankyoldbastardazillion on the trailer too.
Posts: 139
Joined: Fri Apr 13, 2007 3:18 pm
Location: Melbourne

Post by 1TUFFGQ »

Flex it up!:D
GU Patrol intercooled TD42T, lifted, Cheezy sliders, ARB air locker, beadlocked Claws, Warn winch
Posts: 32
Joined: Wed Aug 12, 2009 2:35 am
Location: sydney

Post by jnrlux »

it would be mad to c it cruzin TTC 2010 or even in 4wd action mag
looks good mate well done. u must have one happy child there
Posts: 214
Joined: Mon Jan 21, 2008 11:04 am
Location: NEWCASTLE

Post by HANCOCK »

I would have loved that as a kid well done mate. :shock:
TEAM TONKA

SPONSORED BY
HANCOCK SHEETMETAL
Locktup4x4.com.au
FOR ALL HARDCORE OFFROAD GEAR
Posts: 217
Joined: Thu Oct 06, 2005 7:52 pm
Location: CABOOLTURE

Re: MINI ME monster truck

Post by pootrol »

well i finally got in touch with the technology side and learnt how to youtube etc. heres some pics and vids.

Image
Shot at 2011-03-12
been helping me

Image
Shot at 2010-09-09

http://youtu.be/M7-y3UJeHB4" onclick="window.open(this.href);return false;
http://youtu.be/5Z0RfxkHAXE" onclick="window.open(this.href);return false;
http://youtu.be/Nq9_l05VAck" onclick="window.open(this.href);return false;

being a vehicle theres always something else. wouldnt mind bigger tyres. adjust the auto clutch to let engine spin up a bit more before engaging or a bigger donk as i do like how the clutch locks up real early.

trying to teach boy to hit things hard but it never worked. he is going to be the drive it slow and crawl type i think. in fairness which i didnt realise until i jumped in at end it wasnt reving out prob due to old feul.
www.tradienet.net the tradies forum

09 4x4 lux, mini me
Posts: 1183
Joined: Thu Jul 01, 2004 5:05 pm
Location: Tewantin

Re: MINI ME monster truck

Post by flyinwall »

so when are you going into production with them???
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.

http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
God of Umm
Posts: 4770
Joined: Sat Oct 27, 2007 11:21 pm
Location: im with Stuppedy

Re: MINI ME monster truck

Post by DUDELUX »

Looks fantastic mate.

Did you get the front driving yet??

If you were to start making it these days, would you make it differently??

How much do you reckon it owes you??

What is the chassis made from?? I can see from the early pics, that there looks to be a fair bit of 25x25 SHS in the frame.
MrsForby wrote: Oh I desperately truly love the taco.
Posts: 217
Joined: Thu Oct 06, 2005 7:52 pm
Location: CABOOLTURE

Re: MINI ME monster truck

Post by pootrol »

DUDELUX wrote:Looks fantastic mate.

Did you get the front driving yet??

If you were to start making it these days, would you make it differently??

How much do you reckon it owes you??

What is the chassis made from?? I can see from the early pics, that there looks to be a fair bit of 25x25 SHS in the frame.

not driving the front yet. other projects come and go which makes it impossible to do any more to it. one day ill find something laying around and think thats what i need.

yeah i would do things diff. i think i would set it up where the centre of the diff would be fixed. sort of like the pinion is the pivot point. one tail shaft running between front and back diffsstraight through with say a sprocket in the middle running to gear box. one diff i can flip to make it all spin the right way. this way i can have a easy 4wd and the diffs can articulate using suspension but just dont move up and down. may even do this eventually to this one.

i did a rough count on parts and i think it was 5-6k. labour doesnt matter. the whole thing was on and off over 5 yrs and i rolled my troll at one point so i had nothing else but this at one point.

the whole frame is 20mm rhs with big bits here and there. fibreglass body. was good all i had was a $80 arc, 4" grinder and my 18v battery drill to make it. the metal lathing etc was done when i got a maintenance job at a factory which gave me access to there big machines. oh the best bit was i was paid to work on it. that felt nice....... ;)
Last edited by pootrol on Sun Jan 15, 2012 3:16 pm, edited 1 time in total.
www.tradienet.net the tradies forum

09 4x4 lux, mini me
Posts: 217
Joined: Thu Oct 06, 2005 7:52 pm
Location: CABOOLTURE

Re: MINI ME monster truck

Post by pootrol »

flyinwall wrote:so when are you going into production with them???
tomorrow but i dont think any one could justify what i would charge. did think of a basic one for the daughter in pink with no susp and chain drive front and rear.
www.tradienet.net the tradies forum

09 4x4 lux, mini me
God of Umm
Posts: 4770
Joined: Sat Oct 27, 2007 11:21 pm
Location: im with Stuppedy

Re: MINI ME monster truck

Post by DUDELUX »

Would it work with 1 long chain going around front and rear sprockets, with a centre sprocket attached to the gearbox/motor??

Could you use a wrecked quadbike or something for suspension bits??

Id love to make something like this for myself, err, I mean the kids.
MrsForby wrote: Oh I desperately truly love the taco.
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Re: MINI ME monster truck

Post by toughnut »

It could definitely be worth looking at the front drive of 4wd quads. You could build this into a solid housing to keep the same sort of look.
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Posts: 217
Joined: Thu Oct 06, 2005 7:52 pm
Location: CABOOLTURE

Re: MINI ME monster truck

Post by pootrol »

not with the chain as there always pita. the idea is to use my rear diff, put a centre in the front one but flip it upside down. join the front diff pinion to the rear as one solid unit. the only movement would be twisting, aka susp movment or drive to wheels. stick a big sprocket on the tail shaft that links both diff together then i can run a chain upto my existing gear box. presto 4wd + susp movement. i can prob adapt something into what i got to make it work but it takes to much thinking at the moment. i did entertain all sorts of things and i could of made this alot easier if i went to independant then it would be a peice of pi55 to have 4wd but i simply couldnt do it cos GQs are solid axle and it would of been like breaking one of the commandments or something..........:)

now i dont have trolls and have a lux im tempted to build something based on the current luxes.
www.tradienet.net the tradies forum

09 4x4 lux, mini me
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Re: MINI ME monster truck

Post by toughnut »

have a look at the rear drive of an IRS quad and you could use that as your common shaft between the front and rear diffs. Having the sproket in the center with a chain drive from the motor and then the independent drive shafts going front and rear. That way you can have the diffs moving independent of each other.
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Re: MINI ME monster truck

Post by Skegbudley »

Looks great. My kids a jealous.
GU Patrol with go better bits added
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest