Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
snake racing hi steer and vit brakes?
snake racing hi steer and vit brakes?
anyone know if you can use vit brakes with the snake racing knuckle. im looking to replace my dodgy hi steer that i ground out a bit to fit the vit brakes. so can it be done? snake racing knuckles and use vit brake?
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
the problem is the caliper hitting the king pin retainer thingo - which with vit brakes your caliper is about 1mm off it right now if not touching - so any additional meat to that retainer will mean it just wont fit - and i'd say running the arm up there will mean theres a need for more strength, but perhaps not that far back.... i'd say your best bet would be to take pics of your caliper as it sits on the setup you're running and send it off to snake to ask their opinion.
All that said, my hi-steer setup is from suzistore and has passed engineering here in WA (on my zuk) - bolt on solution and can be done in days rather than waiting for potentially months.
All that said, my hi-steer setup is from suzistore and has passed engineering here in WA (on my zuk) - bolt on solution and can be done in days rather than waiting for potentially months.
The worst thing about censorship is ███████.
Who is online
Users browsing this forum: No registered users and 10 guests