Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

DO 80'S WHEELS FIT 60?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1846
Joined: Fri Oct 31, 2008 2:18 pm
Location: Brisbane

DO 80'S WHEELS FIT 60?

Post by SCANAS »

Will the wheels off my 96 FJ80 fit my 83 HJ60?
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
Top
Posts: 1183
Joined: Thu Jul 01, 2004 5:05 pm
Location: Tewantin

Post by flyinwall »

yes
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.

http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
Top
Posts: 206
Joined: Tue Apr 12, 2005 1:59 pm
Location: Rockhampton QLD

Post by Pauwolf »

probably wouldnt drive it too far but, the offset on the rims is different, making the track very narrow

Paul
91 FJ 80 Project on the go - air lockers, 3in lift, super duper 3F, 36" pedes, toyota V8 getting prepped now
Top
Posts: 134
Joined: Fri Sep 14, 2007 2:23 pm
Location: rocky

Post by perko88 »

No they will not fit! If they are stock 80 offset that is. The rears will fit fine but the fronts will rub the calipers and cause you a whole lot of grief if you try to drive further than out the driveway. if they are 80 rims with an aftermarket offset then you have a chance.
Hj61- ute chop, 12ht, locked, intercooled and caged
Top
Posts: 310
Joined: Fri May 25, 2007 12:16 am
Location: at the shed gympie

Post by scuba steve 22 »

perko88 wrote:No they will not fit! If they are stock 80 offset that is. The rears will fit fine but the fronts will rub the calipers and cause you a whole lot of grief if you try to drive further than out the driveway. if they are 80 rims with an aftermarket offset then you have a chance.
what he said, i put my 80 series gxl rims on my 60 series and they rubbed on the tie rod

cheers steve
Top
Posts: 438
Joined: Tue Feb 20, 2007 7:34 am
Location: Gordonvale Queensland

Contact:
Contact flyology

Post by flyology »

if you have an axle widening kit on the front (IFS lux hubs) and 80 series hubs, GQ discs on the rear, yes, they do fit.... :)

Image
My 60 series rebuild....
http://www.outerlimits4x4.com/ftopic103004.php&highlight=

http://www.flyology.com

2006 CRV Sport (wifes car)
Top
Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Post by oldmate »

i've ran early 80s 15 inch rims on a 60. they come very close to the tie rods but don't seem to rub. Is the offset that much different between 15 ant 16 inch rims?
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest