Im thinking from the Horizontal bars up and just above the lights
Question is is it going to make it excessively weak
ps struth was going to make me one but never happened
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Bundy bar
Moderators: toaddog, Elmo, DUDELUX
Bundy bar
This is my Toyota bar I need to lighten the front so im thinking some of it needs to go,
Im thinking from the Horizontal bars up and just above the lights
Question is is it going to make it excessively weak
ps struth was going to make me one but never happened
Im thinking from the Horizontal bars up and just above the lights
Question is is it going to make it excessively weak
ps struth was going to make me one but never happened
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Automatics=washing machines,dish washers,fridges
If you remove the bars from the edges it will weaken the bar a far bit, I did it to a bar nearly the same as that years ago and first rock it hit/scraped on bent it. Unless you strenght the inside were you cant see it will weaken it
Hell Raiser 4 seat social buggy..
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Who is online
Users browsing this forum: No registered users and 1 guest