I have a gearbox with low gears and a fulltime gearbox.
Can i change fulltime gearbox and put low gears in it? Is that possible?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
can it be built - fulltime with low gears - feroza
Moderator: Tiny
can it be built - fulltime with low gears - feroza
I do not need sex, the government fucks me every day!
From the cross sections of both boxes that i've seen its one or the other.
I can't see the attraction of the full time "transfer" - its not a LSD so its going to create more issues and there's no low range. Sure you can lock it up with the bolt ( underneath the car ) but then why bother ?
And even if the bits went together the low range is still lousy and the transfers prone to failure.
If your willing to do that much work - choose a better gearbox / transfer to start with.
I can't see the attraction of the full time "transfer" - its not a LSD so its going to create more issues and there's no low range. Sure you can lock it up with the bolt ( underneath the car ) but then why bother ?
And even if the bits went together the low range is still lousy and the transfers prone to failure.
If your willing to do that much work - choose a better gearbox / transfer to start with.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
I think its a complete change task - I'm not really aware of any alternative full time engine/transmission combinations that have been fitted to a Feroza.
I think you would be starting from scratch - which might produce a good outcome but will be a lot of work. If you find a solution - let us know.
Now if it was a part time system the that's another story
I think you would be starting from scratch - which might produce a good outcome but will be a lot of work. If you find a solution - let us know.
Now if it was a part time system the that's another story
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Who is online
Users browsing this forum: No registered users and 1 guest