Hi I have an old Engle fridge (About 20years) It has been around Australia twice and has never missed a beat.
What I want to Know is can I plug in the 240volt cord and then plug it into the power as you can do with the new ones with out diconecting it from the 12 volt wireing
I realize I wold have to modifiy the plug.
geoff.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Engel Fridge
Moderators: toaddog, TWISTY, V8Patrol, Moderators
If it's one of the old ones with a sliding gate to prevent you plugging in both plugs at the same time, then NO, these models do not have automatic voltage changeover. Even if you remove the gate, you can't plug both leads in at once as they share a common pin in the centre. If you modify the plug sufficiently to get it to take both you will most likely blow up your fridge.
---> insert witty remark here <---
Who is online
Users browsing this forum: No registered users and 3 guests