Anyway, I was going to shorten and lengthen of the shafts myself and was considering using 50 x 50 x 5 box section. Whats peoples opinions on this
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Tailshafts
Moderators: toaddog, Elmo, DUDELUX
Tailshafts
Well the rover motor and box should go into the lux on the weekend. That will leave exhaust and tailshafts to do before Q Rock (actually trying to have it done for the 27th of March
Anyway, I was going to shorten and lengthen of the shafts myself and was considering using 50 x 50 x 5 box section. Whats peoples opinions on this
Anyway, I was going to shorten and lengthen of the shafts myself and was considering using 50 x 50 x 5 box section. Whats peoples opinions on this
Dave
Probably wont get much over 20kmh as it is basically a rock rig. Having said that, I was sort of hoping to keep my options open a bit as I would love to get the thing registered and Do ASCC. If there was an unregistered class at ASCC I would not hesitate in leaving the car unregistered and only use it for comps.
I have heard / read that a square shaft is better for rock as it does not get cut up quite like a round shaft and that is why I am considering it. I have some tube here that may be suitable for the job. Maybe I should go round first so that at least I have one less worry if Ido decide to try and register it. Square tailshafts would probably be frowned upon straight away.
Cheers
Pete
Probably wont get much over 20kmh as it is basically a rock rig. Having said that, I was sort of hoping to keep my options open a bit as I would love to get the thing registered and Do ASCC. If there was an unregistered class at ASCC I would not hesitate in leaving the car unregistered and only use it for comps.
I have heard / read that a square shaft is better for rock as it does not get cut up quite like a round shaft and that is why I am considering it. I have some tube here that may be suitable for the job. Maybe I should go round first so that at least I have one less worry if Ido decide to try and register it. Square tailshafts would probably be frowned upon straight away.
Cheers
Pete
Who is online
Users browsing this forum: No registered users and 0 guests