Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tailshaft spacer bolts

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 699
Joined: Tue Apr 08, 2008 3:57 pm
Location: mackay

Tailshaft spacer bolts

Post by sprungupcruiser »

I ordered a 25 mm tailshaft spacer for my bj73 cruiser from BBM late last year and it didn't come with any bolts. I tried to chase some up but then found that it was an 11mm bolt, the bloke at the fastener joint said I'd need to go to toyota, I did so with no luck. I just tried calling BBM and they are closed 'til next week. So should the spacer have come with the bolts or is there a good place to get them?.....
Braden Tagg of XRO Racing is scum and not to be dealt with. See here http://www.outerlimits4x4.com/viewtopic.php?f=10&t=223295

bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

i rekon the bloke at the fastener place is confused...

make sure u tell him it doesnt matter wat thread they are.. I have a spacer in the arse of my 80 and i just had to get imperial bolts for it not metric...

when i originally went to get my bolts i took one of my std bolts in and the guy behind the counter got all confused and also told me that i needed to goto toyota,... until i explained that i didnt need anything that thread just the right diameter
Top
Posts: 699
Joined: Tue Apr 08, 2008 3:57 pm
Location: mackay

Post by sprungupcruiser »

haha nah funnily enough when he looked at and put it in the test bolts he asked if it was a landcruiser driveshaft bolt. so he seemed to get it, the imperial bolt is an option but it would be 11.2 mm dia. so i would need to reem it out, which would be a pain in the arse.
Braden Tagg of XRO Racing is scum and not to be dealt with. See here http://www.outerlimits4x4.com/viewtopic.php?f=10&t=223295

bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

sprungupcruiser wrote:haha nah funnily enough when he looked at and put it in the test bolts he asked if it was a landcruiser driveshaft bolt. so he seemed to get it, the imperial bolt is an option but it would be 11.2 mm dia. so i would need to reem it out, which would be a pain in the arse.
i highly doubt u will get longer ones from yota :?
Top
Posts: 699
Joined: Tue Apr 08, 2008 3:57 pm
Location: mackay

Post by sprungupcruiser »

yeah i know, you can't, i called toyota the same day.
Braden Tagg of XRO Racing is scum and not to be dealt with. See here http://www.outerlimits4x4.com/viewtopic.php?f=10&t=223295

bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
Top
Posts: 1451
Joined: Sat Mar 18, 2006 1:25 pm
Location: hilux is in NSW.. Im in WA again

Post by brad 93hilux »

i pulled out the factory tailshaft bolts and took it to a fasteners place, and asked for this bolt 25mm longer, it was a imperial bolt in fine thread(BSF i think).... Dont get them in the coarse thread.

No reason why you cant do that as long as its grade 8.8..

Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Top
Posts: 699
Joined: Tue Apr 08, 2008 3:57 pm
Location: mackay

Post by sprungupcruiser »

cheers mate, do you know what size it was in imperial and what that equates to in metric?
Braden Tagg of XRO Racing is scum and not to be dealt with. See here http://www.outerlimits4x4.com/viewtopic.php?f=10&t=223295

bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
Top
Posts: 1451
Joined: Sat Mar 18, 2006 1:25 pm
Location: hilux is in NSW.. Im in WA again

Post by brad 93hilux »

nah mate not sure, i'n in Nsw at the moment and my truck is in WA....

Sorry, but the fastener place will be able to measure and tell you straight away...mine did.


brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Top
Posts: 37
Joined: Sun May 11, 2008 5:54 pm
Location: esperance

Post by tazzashort »

most 7/16 unf are under size anyway they should fit.
Top
Posts: 699
Joined: Tue Apr 08, 2008 3:57 pm
Location: mackay

Post by sprungupcruiser »

ohh ok well hopefully i'll be able to squeeze them in.
Braden Tagg of XRO Racing is scum and not to be dealt with. See here http://www.outerlimits4x4.com/viewtopic.php?f=10&t=223295

bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests