im changing my extended shackles on my ln106 back to standard..i was just wondering what's involved in doing so as ive never done this before..will i need to put the car on a hoist or is jacking it enough?
cheers in advance
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
changing hilux shackles
Moderators: toaddog, Elmo, DUDELUX
Why was there extended shackles in there?, if you have ifs leaves in the back (and it is not a ifs hilux), normal shackles will not fit.
Jack back up by diff, put car stands under chassis rails, you'll need to pack the stands up with TIMBER or steel, not bricks so that they are high enough unless you have 4x4 stands.
let the jack down until the stands sit on chassis obviously haha, then a little bit more, and undo the shackle nuts, fiddle round with the jack until the jack is right so the pins will knock out with the least amount of effort possible, i'd replace the bush's while i was at it, and get greaseable shackles.
make sure you take the load of the diff off the springs, but dont compress the springs in doing so or a spring might fly at whatever body part is in the way, easy to work out the shackle pin will come out easier when you have it right, just jack the diff little bit by little bit until the pin starts to come out with flogging the crap out of it.
Jack back up by diff, put car stands under chassis rails, you'll need to pack the stands up with TIMBER or steel, not bricks so that they are high enough unless you have 4x4 stands.
let the jack down until the stands sit on chassis obviously haha, then a little bit more, and undo the shackle nuts, fiddle round with the jack until the jack is right so the pins will knock out with the least amount of effort possible, i'd replace the bush's while i was at it, and get greaseable shackles.
make sure you take the load of the diff off the springs, but dont compress the springs in doing so or a spring might fly at whatever body part is in the way, easy to work out the shackle pin will come out easier when you have it right, just jack the diff little bit by little bit until the pin starts to come out with flogging the crap out of it.
BBP Offroad
Boondall Backyard Performance
They call me the MR. throw cash at shiz til its comp specccccc
Boondall Backyard Performance
They call me the MR. throw cash at shiz til its comp specccccc
changin shackles headache???
so tried to change my shackles today..took my extended's of the rear and put the new ones on to find out there about 10mm to wide..anyone else encountered this problem?
Who is online
Users browsing this forum: No registered users and 0 guests