Im looking to get another ute tray headboard hoop bent up.
(changed height of tray)
Its about 2.5 inch tube.
Also looking to get some 3/4 inch tube bent up too.
Can anyone recommend a good:
- engineering shop
- ute tray manufacturer
- backyarder with the right skills
- etc
Preferably on the west side of Melbourne.
Cheers.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
tube bending shop recommendations - Melb North/West
Moderators: toaddog, TWISTY, V8Patrol, Moderators
swadesir
they have bent 50NB med for me before.(with a spoon mandrel not a ball mandrel because the bend angle was too small for a ball mandrel.)
www.swadesir.com
steve from gardbar is better, he is in basywater.
they have bent 50NB med for me before.(with a spoon mandrel not a ball mandrel because the bend angle was too small for a ball mandrel.)
www.swadesir.com
steve from gardbar is better, he is in basywater.
Who is online
Users browsing this forum: No registered users and 3 guests