Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Will it need engineering?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 203
Joined: Thu Aug 11, 2005 11:45 am
Location: Rosedale, gippsland

Will it need engineering?

Post by 88pajero »

I have a rv troopy (forwards facing seat, 3 in front, 3 in rear) and I want to put one of the 2 seat side running bench seats in the rear behind the forwards facing seat. Been a troopy it has all the holes drilled and ready to roll all Ill need to do is bolt in the seat and belts and the job will be done. My question is, because it a facory 6 forwards facing seat rig would I need to get the rear seat engineered even though the holes are already there and other troopies use them?
Jabber gone. Now have 98 nissan terrano and a 94 4.2ldiesel rv troopy on 33s slowly getting the fancy bits. How the hell do I change my user name?
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

I would say yes you need a mod plate for a seating capacity change. The fact that you have the factory holse and assumingly will use factory seats and belts just means you shouldn't have any dramas with an engineer ticking it off.

What does your compliance plate say for seating capacity?
Top
Posts: 203
Joined: Thu Aug 11, 2005 11:45 am
Location: Rosedale, gippsland

Post by 88pajero »

just checked then, the plate said 6.
Jabber gone. Now have 98 nissan terrano and a 94 4.2ldiesel rv troopy on 33s slowly getting the fancy bits. How the hell do I change my user name?
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Then yes you will need an engineer to sign off with a mod plate and you'll just go down to the transport authority and have your seating capacity ammended on your rego. Thats how it works in QLD anyway, maybe someone from Vic could confirm for you.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests