Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

5L: Oilleak, I suspect Front Seals

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 9
Joined: Wed Jul 20, 2005 1:45 pm

5L: Oilleak, I suspect Front Seals

Post by aususer »

Just found my 2002'lux 5L dropping oil - never done it before.

All of a sudden I'm seeing heaps more...
Most of my recent driving has been slogging to/fro work.. so no offroad recently (3 months).

I am suspecting front crank seal..

Having never done one of these before.. is it a tough job? Can it be done from underneath in the frontyard - or better to "pay a man"?
I have most tools (including a torque).
I've not yet had a look at the servicemanual (its at home.. and I just noticed the oil at lunch).
Opinions?

Related or not, I am also seeing drips from the diff too (looks like the drain plug - but will have a better look this weekend when I get under it)..
Posts: 168
Joined: Sun Nov 30, 2008 4:44 pm
Location: Sydney

Post by popeyehj60 »

the crank seals is a fairly tricky job.
depending on wether u need to put a speedy sleeve on the crank or not.
u gotta pull them timing belt off to get to the seal so make sure u know how to line up the pump and cam before u start the job.
Posts: 68
Joined: Tue Jun 10, 2008 9:42 pm
Location: Warragul (sometimes)

Post by troopa »

x2, 5L timing belts R a pain in the ass to do at home.
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

If you have never replaced a cam belt or had anything to do with timing a diesel i would suggest you "pay a man".
You can destroy your enigne if you get it wrong
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Posts: 241
Joined: Sat Dec 15, 2007 8:25 am
Location: Gold Coast

Post by a1 mech »

If you hav a decent manual, free time and a good range of tools then I would do it yourself.

It is worth doing a whole front end rebuild while its all apart. Timing belt, water pump, tensioner, idler etc. It is easy to change the timing belt on the L series diesels. The injection pump, cam an crank all hav good marks so lining it up isnt a problem, just turn the engine over by hand b4 starting to insure nothin is contacting.
Posts: 9
Joined: Wed Jul 20, 2005 1:45 pm

Post by aususer »

I've got to fly out tomorrow for the weekend (and can't "leave it with a man whilst away..)
I have the beast booked in "with a man" for evaluation... so we will see what they say.

After bashing my MQ around and stripping L28 down and up insitu etc... I feel confident that I *could* do it myself... but considering the time and effort (and the annoying part of having to go to work every day... and wife/kids on the weekend) - I think I will leave it to someone else to get covered by soot-laden oil..

To answer the questions:
1. I am mechanicaly ept... and could probably do it...
2. The timing belt was changed pre-my ownership.. (I'm led to believe ;) )
3. got the manual; got the tools (pretty sure I have most of them).

Now I'm just waiting for the boss to complain about the black oil over his pretty, clean driveway.. :lol:

It really does sound like a bigger job than I am prepaired to commit to right now - so I thank you all for your input.

Cheers!
Posts: 9
Joined: Wed Jul 20, 2005 1:45 pm

Post by aususer »

Update: $898 later!!!!

I took it to "the man".. he established a few things:
1. the previous owner changed the timing belt himself... and used "silicone as a gasket" (I believe the prev owner was a plumber)
2. he had no idea of maintenance (I asked him to replace rear diff gasket to fix a slight leak from the LSD diff... aparently it had engine oil in the diff! GRRRR)
3. it was a BIG job overall

Bill included:
Gaskets for both Camshaft and Crankshaft
Gasket for Rear Diff
New timing belt (other was "covered in oil and wrecked")
Usual hose clamps etc
LSD Oil
Engine Oil
etc...

I was quoted "between $600 and $800" - took 2 whole days for them to do... (I guess that includes stock delivery too).

No more oil drips :) - and no more weekendawaythisweekend :(

Lesson learnt: if it is 600-800 expect $900
When you buy a used car - dump all oils and replace them (I did the gearbox and engine -but forgot the diff at the time)
a "little drip" is not normal...
I have LSD in my diff (I had no idea of that one)

Thanks for all your advice and assistance... I am glad I took it to "the man"... he did a professional job and it was only off the road 2 days...
I'm glad I didn't attempt it myself.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests