Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

TB42 auto bellhousing same as TD42 ??

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 7
Joined: Wed Oct 22, 2008 6:48 pm
Location: cairns

TB42 auto bellhousing same as TD42 ??

Post by BENEY »

Does anyone know if a TB42 auto bellhousing is the same as a TD42 bellhousing?

Cheers
Top
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Contact:
Contact dwaynes

Post by dwaynes »

hey mate there different in the starter motor bolt holes. TD has three holes and the TB has 2
www.mudrhino.com.au
Top
Posts: 345
Joined: Mon Aug 04, 2008 8:48 am

Post by chpd80 »

The td starter motor is much bigger, and from what I have seen by putting both starters together is that you would have to drill all three or at least two of the holes as the spacing of them is further apart.

I managed to get a td bell housing to suit from "gut42" thanks mate. ;)
Top
Posts: 7
Joined: Wed Oct 22, 2008 6:48 pm
Location: cairns

Post by BENEY »

Thanks 2 u both - just saved my problem
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 106 guests