Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Plugging in a 1HD-FTE

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Plugging in a 1HD-FTE

Post by lump_a_charcoal »

G'day all...

I was wondering if there is anything that can only be done by Toyota, that my local mechos couldn't do? I am not much of a mechanic, but i understand that Diesels these days can auto tune when plugged into a computer. If it is being serviced by a private workshop, would they be likely to have a computer that would do this, or is Toyota the only place to go for it?

It is an 04 Sahara, 1HD-FTE donk.
Posts: 168
Joined: Sun Nov 30, 2008 4:44 pm
Location: Sydney

Post by popeyehj60 »

Id go to the workshop who knows how to look after landcruisers
the computer for Toyota will only do things like check for codes, code keys and help with diagnostic procedures. not so much tuning the engine.

Coming from dealerships i've seen a lot of landcruisers come from small workshops that don't specialize in 4wds and they've dodgied up something fierce.
for example. wheel bearing nuts undone and done up chisel etc. simple job like repacking bearings turns into a full replacement of the stub axle assembly because they haven't done it properly.
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

So, if the workshop is competent, then they can do everything Toyota can do?
Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

Toyota would probably over charge you for most things
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

beinthemud wrote:Toyota would probably over charge you for most things

Yeah, which is why I don't like going to them...
Posts: 619
Joined: Thu Nov 03, 2005 11:20 am
Location: vic

Post by Hamo »

beinthemud wrote:Toyota would probably over charge you for most things
Are you shore?

I booked my 80 series in with toyota last week to have my aircon serviced as it wasn't get as cold as it used to.
I waited for it while it was being looked at 1 hour later sorry we cant find any thing wrong with your aircon. But we did find the heater control was not closing properly and adjusted it. NO CHARGE!

These motors are pretty expencive to replace just pay what toyota ask and you wont go wrong.
[quote="RN"]So do you support your local vendor...not if it is going to cost me almost double. [quote]
Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

These motors are pretty expencive to replace just pay what toyota ask and you wont go wrong.[/quote]




:shock: :shock: :shock: :rofl: :rofl: :rofl:

Hamo funny
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Posts: 168
Joined: Sun Nov 30, 2008 4:44 pm
Location: Sydney

Post by popeyehj60 »

lump_a_charcoal wrote:So, if the workshop is competent, then they can do everything Toyota can do?

if there competent then yes they will be able to do all things mechanical that Toyota can do.
When it comes to diagnostics and talking to the computer it depend on how good the small workshops scan tool is.

Another thing to remember about Toyota is they also have the backup of the engineers to ask for information about the car is they cant find the reason for fault.
Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Post by oldmate »

a 1hd-fte is not a high tech motor. the pump is still a basic ve distributive pump and anyone with diesel injection experience can fix it. I'd take it to a reputable diesel shop for serivce or repair

As for the rest of it a landcruiser is nothing special. any shop can work on it, but like any make or model you just have to find a good mechanic to begin with. Experience helps, but any mech with a workshop manual for it can do the job properly.

Not all toyota dealerships are hopeless there are good ones and there are bad ones just like any workshop
Posts: 619
Joined: Thu Nov 03, 2005 11:20 am
Location: vic

Post by Hamo »

beinthemud wrote:These motors are pretty expencive to replace just pay what toyota ask and you wont go wrong.



:shock: :shock: :shock: :rofl: :rofl: :rofl:

Hamo funny[/quote]

Whats funny mud ?
Are these motor cheap through r&e
Last time i looked they where going for around $10'000
Or you must be rich
[quote="RN"]So do you support your local vendor...not if it is going to cost me almost double. [quote]
Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

nop the Go to Toyota and Nothing will go Wrong bit
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Posts: 619
Joined: Thu Nov 03, 2005 11:20 am
Location: vic

Post by Hamo »

beinthemud wrote:nop the Go to Toyota and Nothing will go Wrong bit
I think you better read agian
Where have i said "nothing will go wrong"
[quote="RN"]So do you support your local vendor...not if it is going to cost me almost double. [quote]
Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

I was thinking your were being sarcastic

is this the bit your talking about

'These motors are pretty expencive to replace just pay what toyota ask and you wont go wrong'

I appoligise what you said was so much better
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests