Redzook Rebuild / Remenissing Grimbo's Car Thread

[redzook]

also the rear diff has been moved back another 1.5 inches so it is
now 2.5 inches back from stock

should help with the angle on the rear drive shaft

also front will be pushed forward some where round the 3 inch mark

so final wheel base will be round 85.5
should make it a bit more stable on ledges

[greg]

So basically its going to be heaps longer, heaps wider, heaps heavier but still with really small road tyres

Sounds like you're going to have a rampover angle comparative to a limo

[redzook]

i would say my ramp over is still goin to be better then yours

[redzook]

i would say my ramp over is still goin to be better then yours

just in case u didnt read it the first time

[greg]

Oh wow - it was even funnier second time around - fancy that

[N*A*M]

excellent work sam

did you outboard the fixed eye hangers too? would you be able to show pics of that?

tim you'll love the new width and length i think. this should be pretty sweet. especially with the lockers.

[OVERKILL ENG]

[bigsteve]

i would say my ramp over is still goin to be better then yours

Only 3.5 inches wider with COG 2-4 inches higher than Gregs with all that roof and steel up top I reckon your having a bit of a moment there mate.

[greg]

i would say my ramp over is still goin to be better then yours

Only 3.5 inches wider with COG 2-4 inches higher than Gregs with all that roof and steel up top I reckon your having a bit of a moment there mate.

I don't know how i got pulled into this "pick on redzook" thing

[greg]

:shock:

Gee - she's pretty wide there... what sort of offset are we talking with the rims then? They must be fairly standard i guess - since the axels are 7" wider (i gather 3.5" each side)...

[OVERKILL ENG]

The rims are just the standard off the shelf 15/8 ROH rims.
SAM

[Guy]

My tyres stick out almost that far on Zuki diffs .. (bout 3 inches past the origional flare)

[redzook]

i would say my ramp over is still goin to be better then yours

Only 3.5 inches wider with COG 2-4 inches higher than Gregs with all that roof and steel up top I reckon your having a bit of a moment there mate.

3.5 inches wider a SIDE

and what does COG have to do with ramp over?

[redzook]

thanks for the pics Sam

but where are the rest?

have u got a side on 1? so i can see the clearance on the rear of the wheel weel

[grimbo]

i would say my ramp over is still goin to be better then yours

Only 3.5 inches wider with COG 2-4 inches higher than Gregs with all that roof and steel up top I reckon your having a bit of a moment there mate.

3.5 inches wider a SIDE

and what does COG have to do with ramp over?

depends on the ramp I suppose. Are you using the rear ferozas all round? Are they just stock ones or lifted? Why didn't I think of using Feroza leaves for mine? Are they the same width as Sierra springs and will they fit the Sierra spring pads?

[bigsteve]

i would say my ramp over is still goin to be better then yours

Only 3.5 inches wider with COG 2-4 inches higher than Gregs with all that roof and steel up top I reckon your having a bit of a moment there mate.

3.5 inches wider a SIDE

and what does COG have to do with ramp over?

depends on the ramp I suppose. Are you using the rear ferozas all round? Are they just stock ones or lifted? Why didn't I think of using Feroza leaves for mine? Are they the same width as Sierra springs and will they fit the Sierra spring pads?

Search Newbie, I'm sure its all in the members section.

[grimbo]

i would say my ramp over is still goin to be better then yours

Only 3.5 inches wider with COG 2-4 inches higher than Gregs with all that roof and steel up top I reckon your having a bit of a moment there mate.

3.5 inches wider a SIDE

and what does COG have to do with ramp over?

depends on the ramp I suppose. Are you using the rear ferozas all round? Are they just stock ones or lifted? Why didn't I think of using Feroza leaves for mine? Are they the same width as Sierra springs and will they fit the Sierra spring pads?

Search Newbie, I'm sure its all in the members section.

i was waiting for that. i'm having problems with our web server it is not letting me do searches, just crashes my machine.

[redzook]

i would say my ramp over is still goin to be better then yours

Only 3.5 inches wider with COG 2-4 inches higher than Gregs with all that roof and steel up top I reckon your having a bit of a moment there mate.

3.5 inches wider a SIDE

and what does COG have to do with ramp over?

depends on the ramp I suppose. Are you using the rear ferozas all round? Are they just stock ones or lifted? Why didn't I think of using Feroza leaves for mine? Are they the same width as Sierra springs and will they fit the Sierra spring pads?

cog has absolutly nothin to do with ramp over angle

do u read anything i post? if u wana know u will have to start reading
i have answered all them questions on here b4

am i using feroza's all round? check out earlyer in this thread

are the leaves standard or lifted? have a look in my members thread of when i put them in

why didnt you think of using feroza leafs for yours? cos u SUCK an u arnt as smart as me an as far as i know i am the pioneer of feroza springs in a ZUK

are they the same width as sierra springs? members thread

hope it helps ya

[greg]

i was waiting for that. i'm having problems with our web server it is not letting me do searches, just crashes my machine.

Perhaps time to get a proper computer mr apple

[grimbo]

i was waiting for that. i'm having problems with our web server it is not letting me do searches, just crashes my machine.

Perhaps time to get a proper computer mr apple

it's our pc web server that's the problem

[bigsteve]

i would say my ramp over is still goin to be better then yours

Only 3.5 inches wider with COG 2-4 inches higher than Gregs with all that roof and steel up top I reckon your having a bit of a moment there mate.

3.5 inches wider a SIDE

and what does COG have to do with ramp over?

depends on the ramp I suppose. Are you using the rear ferozas all round? Are they just stock ones or lifted? Why didn't I think of using Feroza leaves for mine? Are they the same width as Sierra springs and will they fit the Sierra spring pads?

cog has absolutly nothin to do with ramp over angle

do u read anything i post? if u wana know u will have to start reading
i have answered all them questions on here b4

am i using feroza's all round? check out earlyer in this thread

are the leaves standard or lifted? have a look in my members thread of when i put them in

why didnt you think of using feroza leafs for yours? cos u SUCK an u arnt as smart as me an as far as i know i am the pioneer of feroza springs in a ZUK

are they the same width as sierra springs? members thread

hope it helps ya

Graham gets his own back.

FYI Rod McCormick in VIC has had feroza's in his zook since the first tuff truck.

You said 33 MTR's but they looked like claws in the pic, what tyres are going on.

Steve

[bigsteve]

i was waiting for that. i'm having problems with our web server it is not letting me do searches, just crashes my machine.

Perhaps time to get a proper computer mr apple

it's our pc web server that's the problem

Anybody else smell that???





























Bull Sh(^*(^$

[grimbo]

i would say my ramp over is still goin to be better then yours

Only 3.5 inches wider with COG 2-4 inches higher than Gregs with all that roof and steel up top I reckon your having a bit of a moment there mate.

3.5 inches wider a SIDE

and what does COG have to do with ramp over?

depends on the ramp I suppose. Are you using the rear ferozas all round? Are they just stock ones or lifted? Why didn't I think of using Feroza leaves for mine? Are they the same width as Sierra springs and will they fit the Sierra spring pads?

cog has absolutly nothin to do with ramp over angle

do u read anything i post? if u wana know u will have to start reading
i have answered all them questions on here b4

am i using feroza's all round? check out earlyer in this thread

are the leaves standard or lifted? have a look in my members thread of when i put them in

why didnt you think of using feroza leafs for yours? cos u SUCK an u arnt as smart as me an as far as i know i am the pioneer of feroza springs in a ZUK

are they the same width as sierra springs? members thread

hope it helps ya

i was joking about the ramp thing I know COG has nothing to do with rampover. Its a bling thing right?

I don't want to read all your ramblings because then i have to read gregs witty comebacks and that is just draining.

[redzook]

yes i am gettin mtr's but they arnt at Sams shop yet
so they are using the claws to roll it around

[greg]

I don't want to read all your ramblings because then i have to read gregs witty comebacks and that is just draining.

Mate you're off my christmas card list again - keep this up and i'll just have to keep out driving you on trips too

[bigsteve]

yes i am gettin mtr's but they arnt at Sams shop yet
so they are using the claws to roll it around

Sweet, thanks for clearing that up.

[redzook]

Graham gets his own back.

FYI Rod McCormick in VIC has had feroza's in his zook since the first tuff truck.

You said 33 MTR's but they looked like claws in the pic, what tyres are going on.

Steve

any pics of his rig? i need confirmamation (SP?)

[grimbo]

I don't want to read all your ramblings because then i have to read gregs witty comebacks and that is just draining.

Mate you're off my christmas card list again - keep this up and i'll just have to keep out driving you on trips too

ha got you there I never go on trips. Doh my bad

[grimbo]

i was waiting for that. i'm having problems with our web server it is not letting me do searches, just crashes my machine.

Perhaps time to get a proper computer mr apple

it's our pc web server that's the problem

Anybody else smell that???





























Bull Sh(^*(^$

we just had some new software put into the server and the IT dude forgot something. Some techno babble for he fawked up. So we are getting all sorts of weird crashes and glitches.

I can smell the grand prix if that is any consolation, mmmmm grand prix right around the corner

[bigsteve]

Graham gets his own back.

FYI Rod McCormick in VIC has had feroza's in his zook since the first tuff truck.

You said 33 MTR's but they looked like claws in the pic, what tyres are going on.

Steve

any pics of his rig? i need confirmamation (SP?)

Try looking in the "Post a pic of your fav zook" thread, SWB black with flames, SWB soft top, If you have the tuff truck mag from the first event its in there.