Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Strengthening rear uper spring mounts on a GQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

Strengthening rear uper spring mounts on a GQ

Post by Clanky »

Anyone have any pics or tips of their strengthening jobs on the upper rear coil mounts for a GQ wagon?

I have a 2" body lift which gives me a bit extra room to play
Top
Posts: 453
Joined: Sun Dec 02, 2007 7:37 pm
Location: Brisbane

Post by SuperiorEngineering »

http://www.superiorengineering.com.au/s ... _32_33_181

if you dont want to make your own brackets.
+++++NOW ON FACEBOOK++++++
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
Top
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

n

Post by Clanky »

I like those.
Is there anything that Superior doesnt do? :D
Top
Posts: 1595
Joined: Tue Dec 02, 2003 4:11 pm
Location: Warner, Brisbane Nth

Post by Spartacus »

SuperiorEngineering wrote:http://www.superiorengineering.com.au/s ... _32_33_181

if you dont want to make your own brackets.

$25 ea = :cool:


How thick is the bolt on brace?
MULL
Top
Posts: 453
Joined: Sun Dec 02, 2007 7:37 pm
Location: Brisbane

Post by SuperiorEngineering »

All the brackets as well as the top brace are all 6mm .
The corner braces are weld in.
Top brace is bolt in.
For most guys just bolting in the top brace is sufficient.
If your towers have brocken and torn the chassis it is recommended to do both.
We are working on a Wagon crossmember very soon but the corner braces can be used on them.
+++++NOW ON FACEBOOK++++++
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
Top
Posts: 16
Joined: Sat May 26, 2007 4:07 pm
Location: Townsville

Post by tagz281 »

Are the bolt in braces available for a GU Coil ute? Front and rear. If so what are the part numbers so i can order.

Thanks

Simon
Top
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

Post by Clanky »

SuperiorEngineering wrote:All the brackets as well as the top brace are all 6mm .

We are working on a Wagon crossmember very soon but the corner braces can be used on them.

The website says the one you have will fit a wagon with 2" body lift ( suits me). Are you talking for wagon with no BL?
Top
Posts: 453
Joined: Sun Dec 02, 2007 7:37 pm
Location: Brisbane

Post by SuperiorEngineering »

The brace and gussets fit the gq and gu ute with or without tray lift.

As far as the wagons you will need a 2 inch cab lift ( maybe one inch ? i will have to check when i have one in again) but the gussets fit either way.

Hope that clarified it a bit better.

All part numbers are on the web for you.
+++++NOW ON FACEBOOK++++++
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
Top
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

Post by Clanky »

Good stuff.
The mighty 2" BL has come in handy yet again
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests