Had a minor mishap with the engine so just completed new pistons and a few other bits n pieces.
With a little tuning aspiration in mind what would be a good replacement turbo for the ct12b? Preferably ball bearing garret or along those lines.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Replacement Turbo for 1kz-te
Moderators: toaddog, Elmo, DUDELUX
Im not sure what you'd fit, but i have noticed that the boost drops off quite considerably after 3000rpm on the 12b- drops from 13psi to 10psi on mine, then down to about 9psi at 4000rpm!
Then again, my jap spec 1KZ seems to tuned differently to aussie specs- aussie 1KZ's max out at 9psi!
Then again, my jap spec 1KZ seems to tuned differently to aussie specs- aussie 1KZ's max out at 9psi!
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Who is online
Users browsing this forum: No registered users and 0 guests