Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
pics of some 80 series dual cab chops
Moderators: toaddog, Elmo, DUDELUX
pics of some 80 series dual cab chops
hey im getting my 80 series chopped into a dual cab in the next couple of months but for now looking for pics of them with custom trays
My cut was done by K'js in Geelong, bought out by Rally offroad now,
Give daniel (Ruffy) a call as he may still do something like that.
The lift was 2" coil with 20mm spacers, Tyres are 35" ET's,
Still get a bit sad when I look at all the work I put into it then sold it.
Have never seen it on outers or anywhere since, anyone seen it??
Give daniel (Ruffy) a call as he may still do something like that.
The lift was 2" coil with 20mm spacers, Tyres are 35" ET's,
Still get a bit sad when I look at all the work I put into it then sold it.
Have never seen it on outers or anywhere since, anyone seen it??
Resident Terrorist
+dj_hansen+ wrote:I was going to say... you would prob cry at the state its in at the moment.BushTuckerNed wrote:yeh and its a whole lot more bent nowdirty harry wrote:hey chpd80 ive seenyour 80 on 3rd rock fourm
Has the number plates MUTL3Y
Might be Mutley? I recall someone on there by that name, havent been on for ages.chpd80 wrote:anyone got his username or pics,
might make me not miss it so much.
Theres a few pics of it in here
http://www.3rdrock4x4.com/forum/viewtop ... a&start=25
Username is "Phil"
You will find some pics of it at vic winch last year too
http://www.3rdrock4x4.com/forum/viewtop ... a&start=25
Username is "Phil"
You will find some pics of it at vic winch last year too
www.mudrhino.com.au
Ok, here are some more up to date photos as it sits at the moment. Its not a daily driver and after vic winch i had some $$$ to spend on mechanical bits.
Its a 4wd that gets used as one, If it gets a dent so be it. they happen not goning to wrap it in cotton wool and only drive it on sealed roads. I would rather be out there 4wding than talking about what it might do or how good its gunna be when its finnished. Its a work in progress that gets used.
Hope to get the panels on the drivers side painted in the next few weeks, just finding time to get it done
I would love for it to be all nice and shiny all the time, but then i would be to scarred to use it for what it was built for.
anyway here are some pics
Its a 4wd that gets used as one, If it gets a dent so be it. they happen not goning to wrap it in cotton wool and only drive it on sealed roads. I would rather be out there 4wding than talking about what it might do or how good its gunna be when its finnished. Its a work in progress that gets used.
Hope to get the panels on the drivers side painted in the next few weeks, just finding time to get it done
I would love for it to be all nice and shiny all the time, but then i would be to scarred to use it for what it was built for.
anyway here are some pics
Dont Take this the Wrong way or any other way than Just a Question,
Why UTE 80 series or anything else, What extra Benefits Do you get over cost and time as Apposed to making the 80S Suspension work Better ?
Why UTE 80 series or anything else, What extra Benefits Do you get over cost and time as Apposed to making the 80S Suspension work Better ?
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Automatics=washing machines,dish washers,fridges
Who is online
Users browsing this forum: No registered users and 1 guest