I'm in the market for a new radiator for my 80 series as my car is overheating badly on sand, up hills etc. I have already changed the thermostat, water pump, new oil in thermo fan housing, hoses and fluid.
So, what type of radiator do I get:
Copper and brass tanks
Copper and plastic tanks
Aluminium and plastic tanks
Aluminium
Single, double, triple, quadruple ... core?
Electric fan(s)?
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
What replacement Radiator?
Moderators: toaddog, Elmo, DUDELUX
give aussie dessert cooler a ring they no there stuff pretty well
http://www.aussiedesertcooler.com.au/
Telephone
(03) 9 470 4449
http://www.aussiedesertcooler.com.au/
Telephone
(03) 9 470 4449
if its got t#ts or tyres your gunna have trouble with it
Get the original beefed up to h-duty 4 core.
Aluminium radiators just throw too much heat into the engine bay and some known brands of aluminium fail regularly through build quality.
I went from aluminium to h-duty 4 core and haven't looked back, also hardly ever have to watch the temp guage anymore compared to the aluminium unit I had.
Cheers
Aluminium radiators just throw too much heat into the engine bay and some known brands of aluminium fail regularly through build quality.
I went from aluminium to h-duty 4 core and haven't looked back, also hardly ever have to watch the temp guage anymore compared to the aluminium unit I had.
Cheers
Posts: 34
Joined: Thu Oct 01, 2009 4:07 pm
Joined: Thu Oct 01, 2009 4:07 pm
Location: Just up the adult shop picking up some toys for your mum.
mabey get it split and cleaned. i had the same prob a year ago with my old engine set up, cost me $80. it might save you $
87 hilux,2.8,garret turbo,tru trac rear,gauge,3" lift fnt,2" lift rear.
94 hilux,2.8,denco turbo kit,14psi,racing seats,comp bar & tray,air locker fnt,tru trac rear,sliders,2" lift,33's.
94 hilux,2.8,denco turbo kit,14psi,racing seats,comp bar & tray,air locker fnt,tru trac rear,sliders,2" lift,33's.
stuff
i know most people run when you say REPCO...... but i needed a new radiator straight awat one arvo and had replaced everything else as a precaution for a big trip was gonna cost me 100-150 for flush/clean and new top and bottom o rings, thought stuff it ill buy a new 1 got brass/copper radiator from repco for 400 fitted perfect, also had the trans cooling lines if it was 4 a auto but i didnt need them as 1HZ DX manual. temps went down 1/4 from before it played up. worked for me.
Had a similar problem in the last few weeks and despite filling my fan clutch with new silicon fluid the fan clutch was not working properly.
Fitted a replacement fan clutch from Don Kyatt ($235) and can now hear fan roar and temps are now controlled, maxxing at 95deg C on a big hill climb towing my camper with air con on and maintaining speed limit. On the flat 85-90deg C with ambients at 32-34deg.
I was looking at custom aluminium and brass/copper rads for my 1FZ-FE and over here in Perth I was looking at $1200 minimum!
Fitted a replacement fan clutch from Don Kyatt ($235) and can now hear fan roar and temps are now controlled, maxxing at 95deg C on a big hill climb towing my camper with air con on and maintaining speed limit. On the flat 85-90deg C with ambients at 32-34deg.
I was looking at custom aluminium and brass/copper rads for my 1FZ-FE and over here in Perth I was looking at $1200 minimum!
thanks for the advice fellas
car overheated again over xmas so ripped the radiator out. took it to a local joint to have it rodded, they called me back and said don't bother, its too rooted. was only a 2 core with 4 rows (ie 4 front and back) permanently block, and rest were full off crap. doubt there was any effective flow at all.
bought a new one from them, is a 3 core copper and brass tanks, cost was 500 bucks. put it in, car is awesome now. can actually use hard now, full noise up steep hills and the guage doesn't move. yet to go offroad but foresee no issues now.
Cheers
btw, anyone else changing/removing a radiator in a 80 series, i strongly suggest modded the upper mounts. i drilled the holes out and fitted M8 nutserts, cost couple of bucks and a homemade nutsert tool from scrap steel. now to remove just need to undo 4 bolts and lift, no need to remove top support, grill, lights whatever.
car overheated again over xmas so ripped the radiator out. took it to a local joint to have it rodded, they called me back and said don't bother, its too rooted. was only a 2 core with 4 rows (ie 4 front and back) permanently block, and rest were full off crap. doubt there was any effective flow at all.
bought a new one from them, is a 3 core copper and brass tanks, cost was 500 bucks. put it in, car is awesome now. can actually use hard now, full noise up steep hills and the guage doesn't move. yet to go offroad but foresee no issues now.
Cheers
btw, anyone else changing/removing a radiator in a 80 series, i strongly suggest modded the upper mounts. i drilled the holes out and fitted M8 nutserts, cost couple of bucks and a homemade nutsert tool from scrap steel. now to remove just need to undo 4 bolts and lift, no need to remove top support, grill, lights whatever.
Top idea wish i had of read that 3 weeks agoBluey wrote:
btw, anyone else changing/removing a radiator in a 80 series, i strongly suggest modded the upper mounts. i drilled the holes out and fitted M8 nutserts, cost couple of bucks and a homemade nutsert tool from scrap steel. now to remove just need to undo 4 bolts and lift, no need to remove top support, grill, lights whatever.
But i will defenatly do this next time i pull the radiator
[quote="RN"]So do you support your local vendor...not if it is going to cost me almost double. [quote]
Who is online
Users browsing this forum: No registered users and 67 guests