hi people
i have a 91 pajero and want to put big wheels and tyres on what mods do i have to do and what do you recomend
thanks jimmi
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
bigger the better
Moderator: -Scott-
Hi jimmi, if your thinking 33" tyres, wind up your tortion bars and 2" rear coils, make sure your on level ground and take measurements from the front of your chassis to the ground b4 you start to wind up the tortion bars. You might need to cut a bit off your top bump stops. Also 2" body blocks if your doing some hard 4wding.
Thats what i've done and works well for me.
But if going 32", just a suspension lift will do
Thats what i've done and works well for me.
But if going 32", just a suspension lift will do
Series 1 Disco 2 Door
33" Maxxis Mudders
35" Silverstone Extreme
2" Spring Lift
2" Body Lift
Warn HiMount Winch
33" Maxxis Mudders
35" Silverstone Extreme
2" Spring Lift
2" Body Lift
Warn HiMount Winch
Who is online
Users browsing this forum: No registered users and 12 guests