Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

starter problems

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

starter problems

Post by mickyd555 »

my starter circuit keeps blowing the fuse and i cant start the car!!!!

i have re-wired the starter so its on a push button and it bl;ows the fuse after about 2-3 secs once the button is pushed. It is not a short in the cable as that has been replaced. I think its in the solinoid but i havnt pulled the starter out yet (i will do that on the weekend). what do i look for and is it easily fixed?
Posts: 239
Joined: Thu Aug 07, 2003 2:27 pm
Location: Mongol land

Post by GeneralFubashi »

So the fuse is just inline with a switch and the starter solenoid? What is the rating on the fuse? It shouldnt use too much power as the solenoid is just an electro-magnet.
'79 Bj40, '81 Hj47 Trayback, '86 Hj61 Turbo Auto, '02 Y61 St Coilcab Turbo
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

If you are using the correct rated fuse, its most likely either the starter wire has rubbed through and is touching earth, or youre solenoid is shorting out.
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Posts: 113
Joined: Sat Jul 12, 2008 8:59 am
Location: Sunshine Coast

Post by suggy126 »

Your solenoid can easily draw over 40 amps the pull in and engage the starter.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests