Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

disco potato

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 82
Joined: Thu Oct 30, 2008 7:34 pm
Location: caloundra

disco potato

Post by Glux »

just wonder best place to buy a disco potato turbo in qld and a rough price
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

Got mine from tweakit (website). Was the best price i've found and service was pretty good. Horsepowerinabox.com were the same price. I think it was around $1450 at the time.
Tetanus rolling on 37's
Top
Posts: 12
Joined: Tue Mar 10, 2009 3:03 pm
Location: Queensland

Post by BenoDiabolic »

http://www.tweakit.net/shop/advanced_se ... mb404e3f27
Top
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

Make sure you have a 1mm reduced in the oil line, or you will be smoking up big time...
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

lump_a_charcoal wrote:Make sure you have a 1mm reduced in the oil line, or you will be smoking up big time...
I just used run-of-the-mill fittings provided by enzed - no reducer as such, and no problems with mine.

Also probably be best off with the RS - it comes with plain inlets/outlets rather than the model-specidic flanges provided on some other versions. fyi. the one with a .84 A/R exhaust comes with a t3 ex. flange, the .64 version has a T25 ex flange.
Tetanus rolling on 37's
Top
User avatar
mike_nofx
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Post by mike_nofx »

Image
Top
Posts: 82
Joined: Thu Oct 30, 2008 7:34 pm
Location: caloundra

Post by Glux »

it is for a 1hz with some pump work done so i was going to get the 0.84.what is the go with the reducer in the oil line?
Top
Posts: 613
Joined: Sun Jun 28, 2009 1:44 pm
Location: qld

Post by ledgend80 »

the reducer is there so you supply less oil to the turbo as the ball bearing turbos do not need as much oil as a journal turbo does to lubricate it. if you get the one with the .64 a/r with the t25 flange pm me and i will tell you where you can get a 1 piece adaptor for it if you are going to use the 1hdt manifold. also if you do use the 1hdt manifold you might have to modify your wastgate actuator bracket as it might hit on the block. i had to modify my bracket on mine with the gt2871r
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests