Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Transfere case troubles
Transfere case troubles
Hi Guys
I have recently purchased a 1985 Sierra and i'm having troubles with the transferecase.
When try to change from either hi 4 or low 4 to HI 2 the gearlever becomes stuck in a position were it wont move and i cant get any gear and the only way to get a gear is to remove the gear stick and use a screwdriver to lever the two selector rods into neutral and then refit the gear stick.
Simon
I have recently purchased a 1985 Sierra and i'm having troubles with the transferecase.
When try to change from either hi 4 or low 4 to HI 2 the gearlever becomes stuck in a position were it wont move and i cant get any gear and the only way to get a gear is to remove the gear stick and use a screwdriver to lever the two selector rods into neutral and then refit the gear stick.
Simon
Re: Transfere case troubles
most likely your shift bushing is worn. it's the circular hard rubber bush that the ball of the lever sits on. pull it out and get a new part. also check your oil levels.
yeah I got stuck in the bush for nearly 2 hours with same prob.
once we got it back into gear we found we had to hold the gear stick up to move it. otherwise if fell inbetween the gear I guess and got stuck.
got the bush replaced by a pro and it cost $50
this is before I was game to touch the car, I would do it myself now, its easy.
once we got it back into gear we found we had to hold the gear stick up to move it. otherwise if fell inbetween the gear I guess and got stuck.
got the bush replaced by a pro and it cost $50
this is before I was game to touch the car, I would do it myself now, its easy.
build http://www.outerlimits4x4.com/ftopic130159.php&highlight=
IMHO = who cares if your Opinion is Humble! its your opinion isn't it?
so IMO it a waste of a H
IMHO = who cares if your Opinion is Humble! its your opinion isn't it?
so IMO it a waste of a H
This issue can be avoided .. even with a worn shifter seat ..
you should always move the shifter like |_| this and not U .. as this is waht causes the shiftyer to get missaligned ..
(note to self .. get new shift seat only been stuffed for 4 years now)
you should always move the shifter like |_| this and not U .. as this is waht causes the shiftyer to get missaligned ..
(note to self .. get new shift seat only been stuffed for 4 years now)
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Part 1....useless information
In the 4WD monthly about a year ago they did a section on buying zooks andt that was one of the probs they picked up at the time.
Catch ya
In the 4WD monthly about a year ago they did a section on buying zooks andt that was one of the probs they picked up at the time.
Catch ya
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
then i shared my bed with 2 second tom... [/quote]
Who is online
Users browsing this forum: No registered users and 0 guests