Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
marine grade wheel bearing grease
marine grade wheel bearing grease
just blow a wheel bearing due to rust from water getring in from a river crossing and i was wondering wound puting in marine grade wheel bearing grease seeing that boat traliers are always going in the water and seem to last a while.
Get your self some of this, it is the shit!!!
http://www.moreyoil.co.nz/details.php?& ... roductID=8
http://www.moreyoil.co.nz/details.php?& ... roductID=8
Cable bracing is the way of the future!
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Marine grease is great - but it is not for wheel bearings on disc brake equipped vehicles - that's why the manufacturers don't put marine grade grease in there in the first place.
HTB grease (that's "high temperature bearing") grease is for your wheelbearings.
You can run whatever you like in your free wheeling hubs,- and that might be a good place for marine grease.
Remember though you really should run LMM in your CV's though as it is designed for the very high pressure the contact points on CV's experience.
There are lots of grades of grease for different jobs. Choose the right grade.
Rust in your wheelbearings/hubs means you haven't serviced them enough. Marine grease won't stop the water getting in there or get it out.
Steve.
HTB grease (that's "high temperature bearing") grease is for your wheelbearings.
You can run whatever you like in your free wheeling hubs,- and that might be a good place for marine grease.
Remember though you really should run LMM in your CV's though as it is designed for the very high pressure the contact points on CV's experience.
There are lots of grades of grease for different jobs. Choose the right grade.
Rust in your wheelbearings/hubs means you haven't serviced them enough. Marine grease won't stop the water getting in there or get it out.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
HTB grease is specifically designed for the temperatures vehicle disk brakes achieve - I've had the brakes on my Gwagen glowing red. Trailer brakes don't ever reach those temperatures. You could put anything in trailer hubs - you're not going to cook it.
Steve.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 0 guests