Hi guys,
looking at putting a 1hdfte and auto from 100 series in to our hzj105.
I need to keep the auto,as I am very tall and don't have enough room to use a clutch pedal.
I know there has been a quiet a few of these engine put into older trucks etc now,can anyone tell me if there is a winring loom that is available to just plug it all in too the excisting loom or do I need a doner 100 series and just swap loom into our truck ?
Is there anyone in melb that has done any of these conversions that may be able to do the alectrical work for me ?
Any advice or help would be welcome,
cheers Matt
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1hdt-fte conversion in HZJ105 cruiser
Moderators: toaddog, Elmo, DUDELUX
you are not the only one looking for this info
Check this thread below
http://www.outerlimits4x4.com/ftopic198206.php
Check this thread below
http://www.outerlimits4x4.com/ftopic198206.php
Who is online
Users browsing this forum: No registered users and 2 guests