Single point injection from EA ford to 3F cruiser ??????

[mick&shon]

hey i am in need of some info on the possibility of putting a single point injection(EA FORD) setup on my 3F to eliminate carby problems on steep climbs has anyone had this thought? or might have a idea on how it would preform?............cheers mick

[v8zuki]

only drame is to modify the dizzy to make it fit ie graft the 2 together unless there is another way i dont know about

[chimpboy]

only drame is to modify the dizzy to make it fit ie graft the 2 together unless there is another way i dont know about

There's a thread by Bru21 in the Nissan section, where putting EA single-point injection gear on a TB42 was almost bolt-on plus a dizzy chop as V8zuki says.

http://www.outerlimits4x4.com/ftopic175 ... ght=falcon

http://www.outerlimits4x4.com/ftopic841 ... ght=falcon

I would expect it to be a similar deal on a 3F.

[leehamescort]

http://www.retrotekspeed.com/products/powerjection-iii/

Just put one of these on my V8 surf, bloody cleaver bit of gear and the kit came with everything!!

- self learning/tuning efi (dont need to get it retuned every time you change something on the motor)
- By the time you add up all the bits and pieces you need to convert to EFI the price for this is fairly competitive.
- Sort out the fuel lines and fuel pump, bolt it on, start it up and drive!!!
- Plug in your laptop with a USB and get full control or just leave it do its own thing.
- Bugger all wires to connect, no massive loom, no computer to mount.
- 100% waterproof, they said it would run underwater no probs.
- EFI so doent care what angle the cars on.

The fuel pump that came with the kit is a bloody noisy bit of gear, i ended up using an in tank pump instead.

Would be easy to make an adaptor to put it on the cruiser.

cost me $3000 for the kit from the local supplier, could be bought a lot cheaper direct from the USA.

Costs more initially for the setup but saves a lot of headaches, tuning costs and is simple and complete. I only had to run a return line to the tank, and a couple of hose fittings otherwise everything was there, took 1 day to install and drive straight to Warby for a night run!!

catcha
Leeham

[chimpboy]

$3000

[RAY185]

$3000

x2, a little on the expensive side in this particular case, you can pretty much do a complete EFI falcon motor conversion for about half that doing it yourself.

[chimpboy]

Apparently the XE/F carby is great on slopes as well, just doesn't care much what angle it's on. Might be a cheap near-bolt-on option to look at.

I would prefer the injection myself.

[mhgill]

You could buy a complete CFI EA running vehicle for $200 these days!!!

Do a compete motor conversion or just use the CFI of it...

[want33s]

You could buy a complete CFI EA running vehicle for $200 these days!!!

Do a compete motor conversion or just use the CFI of it...

Thats the go!
Put in a 3.9 and dump the 3F. Leave the injection alone and just buy the adapter kit.

Would be easy to go one step further and put a later 4.0 in too.

[Simonc3]

Thats the ticket! use an AU XR6 engine, chuck in a nice cam while you at it.

[nottie]

Apparently the XE/F carby is great on slopes as well, just doesn't care much what angle it's on. Might be a cheap near-bolt-on option to look at.

I would prefer the injection myself.

XE /F carb chimp is a downdraft weber.