Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4x4 workshop melbourne

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Locked
Posts: 7
Joined: Sun Jan 17, 2010 9:40 pm
Location: Melbourne

4x4 workshop melbourne

Post by crtx »

Hey Guys,

Recently purchased a cruiser 2000 105 series TD was keen to get a full check - report on the car could anyone recommend me some good 4x4 mechanics - workshops in melbourne south eastern side of the city.

Any anywhere i can get oils for the car, diff, lsd, engine oil after the drums.

Thank you
Top
Posts: 1663
Joined: Mon Nov 04, 2002 6:38 pm
Location: bethania QLD

Post by oozuk »

http://www.ontrack4x4.net.au/contact.htm
Trying to finish the Zook

OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
Top
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Contact:
Contact +dj_hansen+

Post by +dj_hansen+ »

Not in the south east unfortunately, but Autocraft in Geelong.

http://www.auto-craft.com.au/
19 Birkett Place
South Geelong
3220
Ph 5221 1371

darren@auto-craft.com.au

As for oils, i personally use Castrol Jmax for Engine, VMX-M for trans/x-fer and appropriate gear oil. All except the engine oil is available from Repco, Supercheap etc and get 20l Jmax from Coburg truck parts in Cambellfield.
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Top
Posts: 1990
Joined: Sun Jan 14, 2007 9:14 am
Location: Melbourne

Post by T_Diesel »

Guest 4wd

194 Grange Road
Fairfield 3078
Victoria, Australia

9497 3899

http://www.guest4wd.com.au
Top
Posts: 677
Joined: Sun Feb 20, 2005 4:53 pm
Location: In them thar hills...

Post by Jeff80 »

Glenmount Automotive, 1/115 Ricketts Rd Mt Waverley VIC 3149 - (03) 9544 4000.

I've had a fair bit of work done by Ken (owner) and he is great. He's a 4x4er too, so he knows the ins and outs of what we do.

Highly recommended...
" Some days you are the bug; some days you are the wind screen"
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Jeff80 wrote:Glenmount Automotive, 1/115 Ricketts Rd Mt Waverley VIC 3149 - (03) 9544 4000.

I've had a fair bit of work done by Ken (owner) and he is great. He's a 4x4er too, so he knows the ins and outs of what we do.

Highly recommended...
x eleventeen.. Also a nice bloke too.
Top
Posts: 7
Joined: Sun Jan 17, 2010 9:40 pm
Location: Melbourne

Post by crtx »

Cheers guys
Top
Posts: 17
Joined: Wed Dec 09, 2009 4:01 pm
Location: melb

Post by ianga »

Jeff80 wrote:Glenmount Automotive, 1/115 Ricketts Rd Mt Waverley VIC 3149 - (03) 9544 4000.

I've had a fair bit of work done by Ken (owner) and he is great. He's a 4x4er too, so he knows the ins and outs of what we do.

Highly recommended...
another one for glenmount my mate is the apprentice there. great place
Top
Posts: 7
Joined: Sun Jan 17, 2010 9:40 pm
Location: Melbourne

Post by crtx »

I have it booked in this week at Glenmount hope all goes well

thanks for the info! cheers
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

Smithies Outback..
Last edited by Ruffy on Tue Jan 19, 2010 4:50 pm, edited 2 times in total.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

What for?
Top
Posts: 32
Joined: Thu Nov 25, 2004 8:56 pm
Location: Geelong, Victoria

Post by Fox Shooter »

yeh what for ?
Top
Posts: 7
Joined: Sun Jan 17, 2010 9:40 pm
Location: Melbourne

Post by crtx »

Could you guys also point me in the right direction for Engine oil? 1HZ motor TD

I have been looking at a local super cheap
Penrite HPR Diesel 15 15W-50
Shell Rimula x 15w-40
Castrol RX Super Diesel 15w-40
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

crtx wrote:Could you guys also point me in the right direction for Engine oil? 1HZ motor TD

I have been looking at a local super cheap
Penrite HPR Diesel 15 15W-50
Shell Rimula x 15w-40
Castrol RX Super Diesel 15w-40
www.lcool.org is the guru place for cruisers.
FWIW I've been using the last 2 for years... The patrol seems to like the Rx Super, and I like it cheap at Supercheap :)
Top
Posts: 7
Joined: Sun Jan 17, 2010 9:40 pm
Location: Melbourne

Post by crtx »

bogged wrote:
crtx wrote:Could you guys also point me in the right direction for Engine oil? 1HZ motor TD

I have been looking at a local super cheap
Penrite HPR Diesel 15 15W-50
Shell Rimula x 15w-40
Castrol RX Super Diesel 15w-40
www.lcool.org is the guru place for cruisers.
FWIW I've been using the last 2 for years... The patrol seems to like the Rx Super, and I like it cheap at Supercheap :)
cheers for that
Top
Posts: 178
Joined: Fri May 05, 2006 6:57 pm
Location: SE melb

Post by Coogs »

More info on Autocraft please ruffy????
I am waiting on parts from there :cry: :cry: :cry: :cry:
95 80s gxl 4.5 pet/gas (4 play)
85 MWB73 350chev pet/gas (4 project)
98 TJ Wrangler (4 Wife)
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Coogs wrote:More info on Autocraft please ruffy????
I am waiting on parts from there :cry: :cry: :cry: :cry:
probably something to go to PM about over forum
Top
Posts: 337
Joined: Wed May 21, 2008 3:47 pm
Location: Birkett Place sth geelong

Contact:
Contact Auto-Craft

Post by Auto-Craft »

Ruffy wrote:
+dj_hansen+ wrote:Not in the south east unfortunately, but Autocraft in Geelong
An incorrect statement about something I was wrong about now chnaged to another Melbourne workshop
:armsup:
Last edited by Auto-Craft on Wed Jan 20, 2010 1:23 pm, edited 4 times in total.
Supercharged 80 SOLD - "OPERATION SANDY" now in effect.
Top
Posts: 337
Joined: Wed May 21, 2008 3:47 pm
Location: Birkett Place sth geelong

Contact:
Contact Auto-Craft

Post by Auto-Craft »

:armsup:
Last edited by Auto-Craft on Wed Jan 20, 2010 1:23 pm, edited 1 time in total.
Supercharged 80 SOLD - "OPERATION SANDY" now in effect.
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

:roll:
Last edited by Ruffy on Tue Jan 19, 2010 5:12 pm, edited 5 times in total.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

IBTL :D
Top
Posts: 2590
Joined: Tue Jan 04, 2005 11:33 am
Location: Brisbane

Post by Chucky »

:popcorn:

I hope this thread don't get locked :D
Top
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

Chucky wrote::popcorn:

I hope this thread don't get locked :D
I hope they work it out, a public slanging match does no one any good.
Peter.
Cable bracing is the way of the future!

v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Top
Posts: 337
Joined: Wed May 21, 2008 3:47 pm
Location: Birkett Place sth geelong

Contact:
Contact Auto-Craft

Post by Auto-Craft »

:armsup:
Last edited by Auto-Craft on Wed Jan 20, 2010 1:24 pm, edited 2 times in total.
Supercharged 80 SOLD - "OPERATION SANDY" now in effect.
Top
Posts: 17
Joined: Wed Dec 09, 2009 4:01 pm
Location: melb

Post by ianga »

when you go to glenmount just talk to Kent and he put you in the right direction.
Top
Posts: 337
Joined: Wed May 21, 2008 3:47 pm
Location: Birkett Place sth geelong

Contact:
Contact Auto-Craft

Post by Auto-Craft »

:armsup:
Last edited by Auto-Craft on Wed Jan 20, 2010 1:24 pm, edited 2 times in total.
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

I couldnt reccomend anyone that has not already been mentioned :D
Last edited by GRIMACE on Wed Jan 20, 2010 2:04 pm, edited 1 time in total.
Top
Posts: 337
Joined: Wed May 21, 2008 3:47 pm
Location: Birkett Place sth geelong

Contact:
Contact Auto-Craft

Post by Auto-Craft »

GRIMACE wrote:
You probably should have kept all this crap to a PM as it certainly feels more like a private matter.
Your PM button broken ?

In your hypocracy, you tell me it should be a PM, but reply to the thread with nothing more than your thoughts, in a tech section ?
Last edited by Auto-Craft on Wed Jan 20, 2010 1:28 pm, edited 1 time in total.
Supercharged 80 SOLD - "OPERATION SANDY" now in effect.
Top
Posts: 1897
Joined: Thu Aug 05, 2004 6:24 am
Location: of the best barwork is at www.bolsys.com.au

Post by 80lsy gq »

...................
Last edited by 80lsy gq on Wed Jan 20, 2010 3:19 pm, edited 1 time in total.
www.bolsys.com.au

the original and the best
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

this thread is confusing!
Last edited by GRIMACE on Wed Jan 20, 2010 2:04 pm, edited 1 time in total.
Top
Locked

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 29 guests